Recent content by Mustangk

  1. Mustangk

    Tuning and LTFT (Long Term Fuel Trims)

    if this is true why does the LTFT seem to add up the STFT, for example: i have stft each bank hovering around 0-2 but once my engine goes closed loop the LTFT climbs up to 20%. indicative of my vacuum leak i think is coming from exhaust bolt hole repair i tapped crooked and leaks oil, a first...
  2. Mustangk

    Sct x3

    u have a sct x3 for sale /
  3. Mustangk

    Milkshake Oil mixing with coolant after drilling exhaust hole to helicoil/tap.

    it was the drivers side(bank2) head 2nd bolt/stud from the front of car. genius me thought i could tap the whole out to around 1/2" after failing to drill straight holes at the smaller variations between m8 and 1/2", ended up drilling into the crankcase right next to the valve spring which also...
  4. Mustangk

    Milkshake Oil mixing with coolant after drilling exhaust hole to helicoil/tap.

    so far so good. cross my fingers. replaced head with what seemed like a good head from an also good block from junkyard, also reused my mls gasket(i believe, stocker), and doesnt seem to be leaking at all, compression showing right at 185 across all 4 cylinders! taking alot of oil changes to...
  5. Mustangk

    Milkshake Oil mixing with coolant after drilling exhaust hole to helicoil/tap.

    So my question is what i need to replace to fix this and how to drain the engine and intake and exhaust or whatever is contaminated with this milky milkshake. i drained it all right after it happened and filled with new oil to drive a block home from where i noticed a problem. So how i think...
  6. Mustangk

    05 GT Exhaust Leak

    2hat kind of smoke machine are you using for this. I need one or two make one
  7. Mustangk

    Changing Clutch Matter Cylinder

    Did u get it ? Pull harder ? Use a pair of extendeded length extended reach long nose pliers to pry it out, carefully, don't crush anything. That's how I did it I think. How much do you weight ? Because I'm a skinny tall and weak human who was able to get it out with a slight struggle. So it is...
  8. Mustangk

    Center console harness pin out

    What's the cool idea
  9. Mustangk

    How to use mighty vac to bleed clutch

    Can someone explain in detailed oriented with a drawing or picture of how the mighty vac works to bleed air out of clutch lines when you connect it to the cap. Do I need to use the canister HALF FILLED with fluid with a HOSE inside going down into the half filled FLUID, which sits IN BETWEEN...
  10. Mustangk

    14.3v only after battery reset. Drops to 13.3v running

    my battery only will stay at 14v or 14.3 after 1st engine start after resetting battery. Then drops down to 13.4 when I turn off engine and go to start it again. Can someone point me to ho directions on how to start using the multimeter to figure out wheree the problem is. The cars seems to run...
  11. Mustangk

    still have thiose 05 vcs foir sakle ?> anything else fr sale >

    still have thiose 05 vcs foir sakle ?> anything else fr sale >
  12. Mustangk

    what do you read to learn all the fundamentals of how everything works., it cant just b iihs...

    what do you read to learn all the fundamentals of how everything works., it cant just b iihs online fsm. it doesnt seem indepth enough
  13. Mustangk

    Is 1.20 LTFT bad lean condition and/or fuel problem or normal ?

    im definately throwing codes now. its been p0171 and p0174 but i keep resetting battery after putting back on and off exhaust and intake in attempts to fix the leak becuase i cant make a DIY smoke machine if my life depended on it. can i use a party fog machine and somehow blow with my...
  14. Mustangk

    Will 2010 catalytic con. And manifold fit a 2005 ?

    Will 2010 catalytic con. And manifold fit a 2005 ?

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top