Search results for query: *

Got my Cylinder head back from getting ported, should really liven up the little guy (I hope)

Well, I needed a fun econo car for getting to and from work. The car has down pipe, intake and cat back exh. Cobb tuner and E30 tune. I still get 30+ mpg when I keep my foot out of it. I know a lot of you guys are saying why would anyone want one, well my 2010 GT had a 326 inch NA motor...

These heads came off my 2010 GT when it had 6,700 miles on it, the heads are complete with stock cams, minus the cam followers and lifters, these could be used as is, nice heads for someone that needs a stock set or a second set to send off for porting, located in Meridian, Idaho. $350

Brand new Heavy duty upper control arm UMI mount, $90 shipped Brand new lower control arms UMI relocation brackets, (weld in) $70 shipped 39 lbs injectors, Used, $75 shipped SOLD Oil Seperator for a FRPP 3V intake, Used $75 shipped SOLD Cam chain Ford wedge tool, for changing cams, $35 shipped...

SOLD!!! Brand new in the box, for a 2005-2012 GT, shipping will suck with these, hows $225 shipped, OBO Located in Meridian, Idaho. Info on the spring http://www.steeda.com/store/steeda-ultra-lite-springs-for-2005-and-up-ford-mustang.html

New in the box part number 6028-CX, this is just for the cats, no X-Pipe, located in Meridian Idaho, $250.00

Pulled my wounded stock block out, I was wondering what would cause the squeaking noise it would make when #8 injector was plugged back in, I figured it was a wrist pin or rod bearing problem, couldn't find anything wrong with anything to do with the rotating assembly, I got looking at the...

I'm swapping in my new N/A set up, and found a problem, the stock block has 2 knock sensors under the Intake, the new boss block only has provision for one in the center of the block, What have you guys done? can I just stack them on top of each other in one location????? Thanks Walt

Full set, Chrome God Speed Omaga's, I purchased these because of there weight, they are 28lbs ea. from Cruizen Concepts, the chrome is crap and has blems, although they do have a 4 year warrenty if you wanted to send them in, 20X10's in the rear with 275/35/20 Michelin Pilot Sport Plus tires...

Spec Alum 6 bolt flywheel, used, needs to be surfaced or a new steel wear plate ($79 from JPC of Spec for a new wear plate) $369 new $150 shipped

I'm looking at my options, and I'm wondering about mileage, how long will a 3.75 or 3.8 last? I know it all depends on how it's driven, maintained and how much power it produces. Any of you guys have a ton of miles on a stroker???? will they go 50-100K, I drive the shit out of my car, (19K last...

I'm looking at both the cast Iron and the Alum. Ford Big Bore blocks, what I need to know is what mods do we have to do to get them into the S197 chassis? from what I read, the Alum block does not have the the water passages for the heater core finished, and the Water pump area is smaller then...

I know this info is in here somewhere, but I can't seem to find the proper search words to find it, so here goes; yesterday I was at the drags (ran a personnel best 12.13 @113 w/1.86 60ft) and I missed a shift on my last run, really ran the rpm's up, now it's missing and has a squeal from the...

I'm trying to Data log with my installed Innovate XD16 (LC1) The gauge reading does not match the data log comp readings, it appears the Multiplier is not correct? any of you know what the conversion should be for the LC1? Live Link 6.2 multiplier is (v*3)+7.35 and it reads way rich when data...

So I got tired of being in the house, so a buddy and I went down to Performance Solutions and put my car on there Dyno Dynamics Dyno, so my question to anyone that knows, Is a load bearing dyno more acurate then a Inertia dyno? my car has been on two different (Inertia) Dyno Jet dynos and now...

Small picture on page 151 but your in there! Congrats...

Yukon 4.56 gears, and a stock Ford carrier out of my 2010 GT with track pack, carrier has 15K miles and the gears have less then 1K miles, I pulled the gears due to noise, I want to make it clear, these gears whine, I did find a bad pinion bearing which may account for some/all noise. these...

SOLD to Cossiedriver!! Set has about 1,000 miles on them, my GodSpeed Omaga wheels would not clear, my stock GT wheels cleared fine, link http://www.baer.com/products/rotors/eradispeed-plus-two.php $300.00 and I'll slip shipping in the lower 48, new price is $600.00 willing to trade/part...

Trying another tuner, and he ask me this question, if any of you can answer it, that would be great... what increase in manifold volume does the Ford Racing Intake Manifold have over stock, states he knows what the info for the C&L, just haven't tuned a Ford 3v intake yet, any help/details...

I raced Sac. throughout highschool, haven't raced there in 20 years, headed back to try and get into the 11's N/A, on next Wednesday I think it's the 20th oct. Wednesday, new UMI upper adjustible and UMI lower should help plant the tires, 12.57 @ 110.36 w/ a DA of 5071 up here in Boise last...

anyone know what error 1018 "Read stratagy fail" means? (I'm pretty sure it means I'm screwed) I updated the firmware on my SCT X3 this afternoon, which requires the car be returned to stock prior to updating, well now I get that error code when I try to load tunes into my car, in fact I'm not...

Just installed and went for quick trip with the new 4.56's and the Shiftmasters driveline, car feels good, headed out to the track in the morning to see how much it helped.... previous best 12.93 @ 110.21,w/1.99 60 ft, last time out 12.96 @ 108.9, hoping my 60ft drops alot......

Here goes, put the car on the dyno, changes are FRPP 3V intake and Magnaflow 3" exhaust Both the before and after runs have BBR mail order tunes both done with the same 20" wheels and tires, and both done in 4th gear. Enjoy

Saturday was a Street Fever night, at our track, I brought my Pinto and my buddy brought my 2010 GT, (thought my car needed a driver mod) anyway he ran a brand new 2011 GT several times, the 11 ran 112.1 mph and my 10 GT ran 108.9, mods on the 11 magnaflow cat back exh. steeda CAI, and Evolusion...

I did search, not saying I didn't miss the thread with the answer but here's my question for those of you that know, my car has not liked to idle for some time now, I've been thinking it was the tune, new tunes have been writen and have not cured the problem, the car just flat out hunts and...