07 Boss's latest activity

  • 07 Boss
    07 Boss replied to the thread Finally got wheels and tires..
    Yeah but they didn’t match my 18” black bullet style front wheels. I put them on a while back cause I had a slight mishap. Anyways the...
  • 07 Boss
    I forgot exactly when but I’m guessing right around 2009-2020 ish. My car has hangers on the mid pipe, it’s a 2007.
  • 07 Boss
    07 Boss replied to the thread Stumped on gearing.
    I just changed the revs per mile until it matched up with my gps.
  • 07 Boss
    You might want to try upping the pressure in your front tires. I had a bit of trammeling going on but I found if I run about 36-38 psi...
  • 07 Boss
    Why didn't you run power to the motor first to see if it was good? Yeah there is a fuse to check. Do you know if it is getting power...
  • 07 Boss
    Had an issue a while back and busted up a rim. Took a while to search and find somethin comparable to the fronts with the right offset...
  • 07 Boss
    28.8", basically 29", This was with ProKit springs. Never rubbed and these are on 10" rims. You should have zero issues with the 8.5"...
  • 07 Boss
    07 Boss replied to the thread P1033.
    What sensor do you have in there? I continued to get O2 sensor codes until I switched back to the NGK sensors. And they have different...
  • 07 Boss
    07 Boss replied to the thread Rattle, bang noises.
    Glad you found it, it can be a frustrating ordeal. My car has seen some action and as she's getting older there are quite a few noises...
  • 07 Boss
    You can put it anywhere as long as the hoses reach and it should be above the level of the pump itself. Other than that it doesn't matter.
  • 07 Boss
    07 Boss replied to the thread Fuel pump issue.
    Yeah, well venturi refers to the principle involved in using flow to increase or decrease pressure through velocity where technically a...
  • 07 Boss
    07 Boss replied to the thread Fuel pump issue.
    Double check your crossover tube. I had this issue once and the tube looked like it was attached but was not seated all the way. I...
  • 07 Boss
    07 Boss replied to the thread Coil overs Shelby GT 2008.
    I don't think that is a bad stance. Wheel gaps look decent all the way around. But if you want to lower it why not just get some springs?
  • 07 Boss
    07 Boss replied to the thread Welding rear end housing.
    When I did mine I went ahead and did the lower control arm mounts also,
  • 07 Boss
    Raxiom is hit or miss. I haven't had issues with my taillights except now the finish is a bit degraded. But it is to be expected...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top