Joshua Hampton
Junior Member
So I changed the blend door actuator on my 07 mustang. It was the one behind the dash on the upper end. I disconnected the battery(negative terminal), then passenger air bag...removed it. Then on to the actuator replacement. Reversed everything in that exact order. Started the car, and no power to the A/C controls. Fuses and relays are fine under the hood, and in the SJB. Did an PCM reset...nothing. Pulled connector off new actuator just for shits and giggles...nothing. Yes I've triple checked to make sure nothing else was accidentally unpluged. I tested with a test light to see if I have power to the controls, I got nothing. I'm lost....anyone got any suggestions?