The 5.0 in ESP trim can make 150hp over what my car makes at the wheels. The 4.6 is great, if you go forced induction. Which is not legal....
If one has FI on a 4.6L.... what category do u end up in...or is it a strict no-no ?
The 5.0 in ESP trim can make 150hp over what my car makes at the wheels. The 4.6 is great, if you go forced induction. Which is not legal....
If one has FI on a 4.6L.... what category do u end up in...or is it a strict no-no ?
You won't need brake pads for autox. I had HP+ and AX6s on the S197 and the stock S550 PP stuff is every bit as good......and quiet.
Depending on track layout, how does one manage to overheat the brakes in a 58 sec autoX run ?
Depending on track layout, how does one manage to overheat the brakes in a 58 sec autoX run ?
Depending on track layout, how does one manage to overheat the brakes in a 58 sec autoX run ?
I smoked my stock pads, with less than 5000 miles on the car, at an event last summer with a co-driver. We weren't exactly hot lapping the car, but there was maybe 5 minutes between runs, and on my 4th run (the 8th of the afternoon), the front pads finally just gave up about three quarters through the run. They were literally smoking as I limped through timing. This was on a ~80 second course.
That course was either waaay too fast or sounds like it is 100% unfun to drive.
Subbing.
I'm coming to NE whiskey. You need to show me a thing or two.
Ohh?! Coming to Nationals or moving here because you hate your life?
Ironically enough, this car is not being run at the moment. Only thing on the car that is left on it are the exhaust pipes, CAI+Tune, torque arm, and the front LCA's. Everything else is off and the Watts and Coilovers are sold.
Can't wait to see the 15' on the course. Nah not moving there, but I have to travel to STL/KC for most SCCA/NASA events so I figured I should just book and event in NE and swing up. I just gotta get rid of these donk 20s.
Yes.
Sorry Whiskey but just to make sure, you answered yes for hot or cold pressure ?
Just started lapping my Mustang and wondering which pressure to run.
Thanks !