DIY Fluid Dispenser

Scott

Senior Member
S197 Team Member
Joined
Nov 17, 2009
Posts
2,337
Reaction score
37
Location
King City, Ontario, Canada
Worked great for me in January 2013 on my forged motor.

The pre-lube configuration consists of the following parts:

- Napa ¼” inlet and outlet Gold Fuel Filter, part number 3001
- WATTS 3/8” Barb x 3/8” MIP Hose Adapter, part number A-294 (Pressure Tank Hose to Shut Off Valve)
- WATTS ¼” Barb x ¼” MIP, part number A-192 (Pre-luble tube to Oil Block Adapter)
- WATTS ¼” Barb x 3/8” MIP, part number A193 (Shut Off Valve to Pre-lube Hose)
- WATTS ¼” I.D. x 3/8” O.D. x 10’, Clear Vinyl Tubing, part number SVGE10
- Aqua Dynamic 3/8” Ball Valve, part number 1107-002 (Oil Flow On / Off Valve)
- RL Flo-Master Sprayer 2 Gallon Translucent White Polyethylene Tank (Clearly would have preferred a 1 Gallon Tank, but try finding one in January)
- Loctite 567 Thread Sealant



Assembled.



Pre-Lube attached to the Oil Adapter, Oil Pressure Sender Port



As an example, break-In Oil flowing to the Lash Adjusters.

 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top