Ooops -- $14995
Built with all new top shelf parts
Only time is on dyno -- proper break in procedure on dyno
Build Sheet:
- World Products Man O' War 351W Block with Billet Splayed 4 bolt Main Caps
- Edelbrock Custom Built Victor JR 351W Heads with 70cc Chamber --
- Edelbrock 2.055/1.60 Stainless Valves
- Isky Dual 1.530" Valve Springs
- Isky Valve Spring Locators
- Comp Cams 10* Retainers
- Comp Cams 10*Valve Locks
- ARP 7/16" Rocker Arm Studs
- Edelbrock Guide Plates
- Scorpion Aluminum 1.6 Ratio 7/16" Stud Mount Roller Rocker Arms
- Edelbrock Victor Jr Single Plane Manifold
- SCAT 4340 Forged 4" Stroke Crank with 2.750" 351C Mains
- SCAT 4340 Forged 6.250" H-Beam Rods with ARP 2000 Bolt Upgrade
- MAHLE Performance Forged -26cc Dish Piston with Plasma Moly Rings
- Clevite 77 H-Series Race Main Bearings
- ACL Performance H-Series Race Rod Bearings
- Durabond Performance Cam Bearings & HP Hardware Kit
- Ford Racing 9 Keyway Timing Set & 1 piece fuel pump eccentric
- Competition Cams Custom Ground Hydraulic Roller Cam with 351W firing order
- Melling Performance Retro-fit Hydraulic Roller Lifters
- Pioneer Timing Chain Cover
- Powerbond Performance Harmonic Balancer - Internal Balance
- Milodon Aluminum High-Flow Water Pump
- ARP Headstuds
- ARP Balancer Bolt
- ARP Oil Pump Shaft
- ARP Engine Bolt Kit
- All Fel-Pro Performance Gaskets
- Manley 5/16" .080 Wall 1 Piece Pushrods
- Moroso 7 Quart Front Sump Oil Pan - Baffled with Windage Tray
- Melling Performance M-Select Standard Volume Oil Pump
- Ford Racing Polished Valve Covers with Custom 427 Logo and Blue Striping
- MSD Ready to Run Distributor
- Roush Performance 9mm Spark Plug Wires
- NGK Spark Plugs
Last edited: