Bushing saddles

msczesny1186

forum member
Joined
Sep 24, 2012
Posts
303
Reaction score
0
Location
New Jersey
Hey guys. So I have a whiteline front swaybar and the bushings are a extremely tight fit. I have to literally crank the saddles down the the mounting bracket and I think I'm bending the saddle around the bar. I saw you sell a bushing saddle combo on summit racing http://m.summitracing.com/parts/upi-0048 I was wondering if this would work / help. Whiteline lists the bar as 33mm and those bushings/saddle combo is for a 35mm. I feel confident it will work but wanted to ask first.

Thanks
Mike
 

UMI Sales

Member
Official Vendor
Joined
Aug 27, 2009
Posts
104
Reaction score
1
Location
Philipsburg, Pa
Mike,

If you're bar is 33mm I would avoid running anything that's not advertised to fit 33mm. If you have metric calipers you can measure the true diameter of the bar. Powdercoat build up may be a variance on your Whiteline bar.... 2mm of slop would likely wear that bushing out quickly and cause some unwanted knocking.

Thanks, hope this helps.
Zac
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top