LordBritish
forum member
- Joined
- Apr 9, 2009
- Posts
- 315
- Reaction score
- 0
My tachometer malfunctioned about a year ago.
I researched the issue and it appears to be a failure of the stepper motor so I bought some stepper motors on eBay.
Well today I finally got around to fixing it.
Here's my amateurish soldering job. It took me a while to get that stepper motor out.
On close inspection, my soldering job did not look promising, however, when I fired up the car it worked !!
Some of the needles were a little off but I just adjusted them as needed.
Well, I'm quite happy with the results !!
I researched the issue and it appears to be a failure of the stepper motor so I bought some stepper motors on eBay.
Well today I finally got around to fixing it.
Here's my amateurish soldering job. It took me a while to get that stepper motor out.
On close inspection, my soldering job did not look promising, however, when I fired up the car it worked !!
Some of the needles were a little off but I just adjusted them as needed.
Well, I'm quite happy with the results !!