blacllkllsi
forum member
- Joined
- Jan 24, 2009
- Posts
- 311
- Reaction score
- 0
Figured I would post this here since I am still unable to post on the DOB forum. I am finally finishing up my install and did my first start up yesterday. All went well except the belt on this one pulley beneath the waterneck is hanging off the back of the pulley about a 1/4 inch or so. You can see the belt wobbling slightly after it passes the pulley. I was thinking of shaving down the spacer but am wondering what could cause this? I am running 3 76mm idler pulleys, 2 on the bracket and one beneath the alternator, and a 3in supercharger pulley. The pulleys look lined up otherwise. I am also getting this chirping noise, sounds like it's the supercharger.
Last edited: