Correct part# for Moog Ball Joints?

o2sys · May 15, 2017

Does anyone know what the differences are between these two ball joints?

K500112:
http://www.moog-suspension-parts.com/moog-k500112

K500033:
http://www.moog-suspension-parts.com/moog-k500033

One says 07-10 and one says 05-09 which I thought were all the same across 05-early 2010's?

86GT351 · May 15, 2017

I would consider replacing the complete arm. Along with the Ball Joint, the Rear Hydo Bushing is also a potential concern

o2sys · May 15, 2017

I'm going to use the new design arms from a 2011-13 and put new ball joints and upgrade the hydro bushings with Protane ones.

Putting Moog ball joints so I can keep my spindles.

It will be cheaper than getting frpp arms that still have hydro bushings on them.

SVT Rider · May 15, 2017

The K500112 appears to be for the Shelby GT/GT500. No clue why there would be differences unless Shelby perhaps chose a longer ball-joint shaft as a bump-steer offset.

The K500033 is quoted to be for the Mustang Base/GT.

http://www.fme-cat.com/Application.aspx?year=2007&make=FORD&model=MUSTANG&cat=Suspension&subcat=Control%20Arms,%20Ball%20Joints,%20Bushings,%20Misc.&brand=MOOG%20Steering%20%26%20Suspension&ga=Y

o2sys · May 16, 2017

Called Moog Tech and they don't have an answer for me either. Just says one is for GT and the other is for Shelby GT & GT500s....Makes no sense .

Correct part# for Moog Ball Joints?

o2sys

forum member

86GT351

forum member

o2sys

forum member

SVT Rider

Member

o2sys

forum member

Similar threads

Latest posts

Support us!

Sponsor Links