Isaacford2012
Junior Member
- Joined
- Feb 5, 2017
- Posts
- 2
- Reaction score
- 0
I have a Roush SC kit I was hoping I could get some help from someone when installed did you have to adjust the voltage on the throttle body. I know like BBK you have to take notes on it an adjust to voltage and so on I've watched videos read up an everyone kept coming up with a .98 some say it was a myth idk. Grounded off to one of the SC mount bolts and the red wire running to green wire with a purple line using DC not AC like most stated on the Web and throttle body voltage was reading 1.37 tried grounding off a few different places and it'll very but not by much grounded off at the battery it showed 1.29 I was hoping if someone had any reference # or wouldn't mind taking some time out of there day to get a reading on the voltage I would greatly appreciate it
Here is a pic of where I grounded off to an the regulator I'm talking about if I turn the nut it goes up or down on the voltage reason for asking is my rpms drop off when coming to a stop an an sometimes choking to car off its like hit or miss sometimes it does it sometimes not
Sent from my SAMSUNG-SM-G891A using Tapatalk
Here is a pic of where I grounded off to an the regulator I'm talking about if I turn the nut it goes up or down on the voltage reason for asking is my rpms drop off when coming to a stop an an sometimes choking to car off its like hit or miss sometimes it does it sometimes not
Sent from my SAMSUNG-SM-G891A using Tapatalk