Team JDM builds 1000 HP Mustang

JimIII@JDM

Senior Member
Official Vendor
S197 Team Member
Joined
Sep 15, 2007
Posts
3,065
Reaction score
5
Last week we had a good customer and friend of ours Tim Porter leave with his 2011 Shelby GT500 UBB Mustang. Tim is a promoter of the Cannon Ball run and Great American race. A few years ago he came to us for an engine and parts to build a 700 RWHP GT500 which he dubbed the UBB. Now UBB stands Ultimate Bad Boy edition Mustang and with this car he competed in his event and went on across the world with the car showing it off to high end clients for a possible resale edition of the car. Fast Foward to present day and Tim now has a big following amoung his group and more than a few individuals who are looking at buying these UBB cars. So Tim went out and bought a new 2011 Shelby GT500 and drove it from California to our shop in Freehold NJ for a 1000 BHP transformation!!

Right off the bat I knew we wanted to use the 4.0L whipple, the end all be all of Superchargers for a Shelby GT500! Along with the 4.0 monster we added 80lb injectors, PHP modified fuel pump assembly, Whipple 123mm air intake, Kooks full exhaust, and a AFCO heat exchanger. This we knew would be enough to get Tim close to 1000 HP at the engine on 93 octane. We decided that if he was going to make this power with ease and give the car the aggressive tone he was looking for that we had to add a set of our custom grind NHRA spec Cobra Jet Superstock cams that we run in Roy Hill and several other of the worlds fastest Cobra Jet mustangs. With these cams in the car any one who pulls up next to Tim at a Stop light will wonder if the are on a public road or at the drag strip! These cams really give the car the thump and sound that will make anyone stop and turn their head to see whats coming!

It took a little longer than a week to install all the parts and give everything the extra special attention to detail that Tim was looking for but the end result was one of the most powerful street cars we've ever had leave our shop. Tim's car netted 801 RWHP and 650 LBFT of Torque!! This was done on a safe 93 octane street tune. With this same combination in Roy Hill's Cobra Jet we have made over 970 RWHP on C16 Race fuel.

Now dont be suprised to see this car in future Magazine articles or internet videos as Tim is a big promoter of the UBB brand and Cannon ball events. If all goes according to his plan he would like to make an additional 25 UBB Mustangs for 2012 and plans to offer a 700HP package 5.0L Mustang GT version of the car as well. You can see in some of the pictures I posted its dressed up with a Carbon Fiber hood and splitters as well as some custom 18" wheels. The car also has UBB 1000BHP stickers which replaced the factory shelby stripes on the side of the car. For any for information about Tim's car or the parts we installed on it contact Team JDM at 732-780-0770!!!

Thanks,

Enjoy the pictures!!

Jim D'Amore III


293233_10150312713694312_511524311_7802603_1385082423_n.jpg


320388_10150312724184312_511524311_7802692_1106678010_n.jpg


309691_10150321037550139_121068375138_7896357_1475029015_n.jpg


299030_10150321033395139_121068375138_7896345_341182352_n.jpg

299030_10150321033390139_121068375138_7896344_677271375_n.jpg
 

1 Alibi 2

If not today, when ??????
Joined
May 4, 2011
Posts
2,148
Reaction score
2,281
Location
Hackettstown, N.J.
Saw this car in the shop on 1 Sept. 2011, pictures don't do it justice. Two things struck me about the car.
1. With the hood closed, the ultimate sleeper.
2. The car had Calif. plates......the owner took it all the way to N.J. for work......JDM must be worth the drive.
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top