W3bb3r04
Slow 3v Member
I am going to try and do a good write up as I go through my wire tuck. I am going to try and do it as step by step as I can because this is my first time and Im sure most of the people that would be trying this will be too.
First off I removed the battery and battery tray.
Then I removed the fuse box cover and loosened the 4 bolts inside to allow me to remove the box itself. Then I removed the 3 bolts holding the bottom of the box on. Following that I removed the (4) bolts holding the ECU bracket to the car.
Then I started removing the wire loom. This is very time consuming. You have to unplug connectors as you go. Be sure to label ones like the coil packs and injector plugs so you know where they will go at the later point and time. This is all that I have for the night. Anyone that has done this so far, tips are appreciated and any questions from anyone else Ill be glad to answer as I come to them!!
First off I removed the battery and battery tray.
Then I removed the fuse box cover and loosened the 4 bolts inside to allow me to remove the box itself. Then I removed the 3 bolts holding the bottom of the box on. Following that I removed the (4) bolts holding the ECU bracket to the car.
Then I started removing the wire loom. This is very time consuming. You have to unplug connectors as you go. Be sure to label ones like the coil packs and injector plugs so you know where they will go at the later point and time. This is all that I have for the night. Anyone that has done this so far, tips are appreciated and any questions from anyone else Ill be glad to answer as I come to them!!
Last edited: