Wiring diagram for using cruise control button to activate line locks

07Alloy

forum member
Joined
May 9, 2008
Posts
178
Reaction score
3
Location
Clarion Pa.
As long as you can find the appropriate color wire coming from the button you want to use, then it should work fine. Wouldn't be any different than the cruise button


Sent from my iPhone using Tapatalk
 

NA-Stang

AMC #8 aka "The Jockey"
Joined
Oct 24, 2009
Posts
543
Reaction score
2
As long as you can find the appropriate color wire coming from the button you want to use, then it should work fine. Wouldn't be any different than the cruise button


Sent from my iPhone using Tapatalk

Sweet ass sweet. Thanks!
 

1bad99

forum member
Joined
Jun 4, 2012
Posts
442
Reaction score
0
Location
Texas
bringing post back from the dead.... anyone have pics of the original first post that was shown when kimmer posted the both ways
 

46addict

13726548
Joined
Aug 25, 2016
Posts
1,832
Reaction score
56
Location
Lawrenceville, GA
this is for the CC
9k=


here 1 for the horns , looks like it will work .
001-1.jpg

I used the diagram above to wire the CC off switch to fire my nitrous solenoids, but I can't get it to work. The accessory switch is able to click the relay on & off but when I press the CC off button, nothing happens. Any ideas?
 

1bad99

forum member
Joined
Jun 4, 2012
Posts
442
Reaction score
0
Location
Texas
that diagrham is only for dedicated accessory right ? or can you also use the off for the CC ?
 

Wes06

forum member
Joined
Jan 21, 2012
Posts
5,383
Reaction score
59
It looks like it's just using a dual position setup. It either activates the relay, or it doesnt
 

46addict

13726548
Joined
Aug 25, 2016
Posts
1,832
Reaction score
56
Location
Lawrenceville, GA
Does the wire going into pin 86 need to be fused as well?

Is this SPDT switch supposed to be a momentary switch?
edit: never mind, I found 3 position switches that will do the job. There are SPDT momentary switches too but that won't make sense in this case.
 
Last edited:

sdleo29

forum member
Joined
Apr 15, 2014
Posts
518
Reaction score
3
Location
Long Island NY
Does the wire going into pin 86 need to be fused as well?

Is this SPDT switch supposed to be a momentary switch?
edit: never mind, I found 3 position switches that will do the job. There are SPDT momentary switches too but that won't make sense in this case.



Fuse 30, that's the high power feed
 

SirKoda

Junior Member
Joined
Sep 24, 2017
Posts
13
Reaction score
0
Location
Toney, AL
Great write up. Im going to use it for momentary nitrous engage. But as a side note the previous posted pictures are no longer here
 

46addict

13726548
Joined
Aug 25, 2016
Posts
1,832
Reaction score
56
Location
Lawrenceville, GA
Using the SPDT switch and relay did not work for me and I gave up. I was using a normally open relay and I'm not sure if that mattered.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top