- Joined
- Sep 15, 2007
- Posts
- 3,065
- Reaction score
- 5
If your looking to upgrade the Supercharger on your 2007-2012 Shelby GT500, then Team JDM has the answer for you! :banana: The Ford Racing TVS 2.3L Supercharger is the factory production unit used on a 2013-2014 GT500 and comes with the necessary fuel rails, belt, and hardware for install. The TVS blower also comes with the Option of a Twin bore 65mm Ford Racing Throttle Body or the Super Cobra Jet Mono Blade Throttle Body. Team JDM has included the JLT 123mm Cold air intake and a colder set of NGK TR6 spark plugs to this package to complete all the necessary parts for installation. Custom tuning will be required for installation and some cars may even need a fuel delivery upgrade. This package has the potential to make over 700 HP at the tires with additional components, most cars will make between 620-650 RWHP when installing this kit the way it comes and adding a custom tune.
$3099.00 with FREE SHIPPING!!!
Note** 2007-2009 GT500 cars will require a EVAP fitting elbow from billet pro shop
Ford Racing TVS TUNER kit w/ Mono blade Throttle Body
Ford Racing TVS TUNER kit w/ Dual 65mm Bore Throttle Body
Where the Mono blade provides a little more air flow and gives you a snappy and responsive pedal feeling, the Twin bore 65mm offers stock like driveability some people prefer more for street use. With a good custom tune the Mono blade can perform equally as well but not all tunes are equal so there has been reports of variance in driveability. Team JDM does offer a very nice tune for the Mono blade throttle body and for the extra power gain is our recommendation.
Looking for more Fuel Delivery when installing this package, Team JDM recommends any of the following injector sizes for this application. A new popular option is the Ford Factory Injectors from a 2013 GT500. These injectors are rated at 55lb/hr and on a 2011-2012 car can support over 700 RWHP! For most 2007-2010 model cars that run a lower base fuel pressure we recommend a larger fuel injector like the Bosch 72lb/hr or the Ford Racing 80lb/hr injectors (require fuel rail spacers.) Additional Custom tuning is required for any of these injector changes.
Team JDM also offers a 2.40" TVS supercharger pulley that will add 2-3 psi more boost and 30 HP!! if your looking for more power! Need a pulley removal/installation tool to complete this task? No Worries, Team JDM has you covered with our Pulley Puller Rental tool! $140 secures the tool and when returned back to JDM you will receive a $110 credit!
For Any Questions regaurding this kit or any of the upgrades please feel free to comment here or contact us at 732-780-0770 and Email at [email protected]
Thank you,
Jim D'Amore III
JDM Engineering
$3099.00 with FREE SHIPPING!!!
Note** 2007-2009 GT500 cars will require a EVAP fitting elbow from billet pro shop
Ford Racing TVS TUNER kit w/ Mono blade Throttle Body
Ford Racing TVS TUNER kit w/ Dual 65mm Bore Throttle Body
Where the Mono blade provides a little more air flow and gives you a snappy and responsive pedal feeling, the Twin bore 65mm offers stock like driveability some people prefer more for street use. With a good custom tune the Mono blade can perform equally as well but not all tunes are equal so there has been reports of variance in driveability. Team JDM does offer a very nice tune for the Mono blade throttle body and for the extra power gain is our recommendation.
Looking for more Fuel Delivery when installing this package, Team JDM recommends any of the following injector sizes for this application. A new popular option is the Ford Factory Injectors from a 2013 GT500. These injectors are rated at 55lb/hr and on a 2011-2012 car can support over 700 RWHP! For most 2007-2010 model cars that run a lower base fuel pressure we recommend a larger fuel injector like the Bosch 72lb/hr or the Ford Racing 80lb/hr injectors (require fuel rail spacers.) Additional Custom tuning is required for any of these injector changes.
Team JDM also offers a 2.40" TVS supercharger pulley that will add 2-3 psi more boost and 30 HP!! if your looking for more power! Need a pulley removal/installation tool to complete this task? No Worries, Team JDM has you covered with our Pulley Puller Rental tool! $140 secures the tool and when returned back to JDM you will receive a $110 credit!
For Any Questions regaurding this kit or any of the upgrades please feel free to comment here or contact us at 732-780-0770 and Email at [email protected]
Thank you,
Jim D'Amore III
JDM Engineering