bc coilovers

2012_Rs1

Junior Member
Joined
Jun 16, 2017
Posts
3
Reaction score
0
i have a 2012 rs1 with 20x9.5 rims wrapped in 275/35zr20 all the way around. I plan on installing a set of bc coilover on my car here soon is there anything else that needs to be installed at the same time to prevent scrubbing and help with the ride?
 

Attachments

  • 0513171805a.jpg
    0513171805a.jpg
    521.5 KB · Views: 14
  • 0513171805.jpg
    0513171805.jpg
    286 KB · Views: 14
  • 0429171745a.jpg
    0429171745a.jpg
    495.8 KB · Views: 14

travelers

Senior Member
Joined
Apr 6, 2007
Posts
3,028
Reaction score
79
Location
Eastern Pa
An adjustable panhard bar to keep the rear centered when you lower it. Also is the front upper mounts adjustable?
 

o2sys

forum member
Joined
Jun 26, 2011
Posts
4,367
Reaction score
19
Location
NY/NJ
BCs come with camber plates so like travelers said adjustable Panhard bar would be the minimum.
 

2012_Rs1

Junior Member
Joined
Jun 16, 2017
Posts
3
Reaction score
0
Thanks yall, also any of yall had thr bc br coil overs with the swift springs on there 11-14 mustang? btw nice car travelers
 
Last edited:

Chriss_302

Junior Member
Joined
Jul 12, 2017
Posts
15
Reaction score
0
Location
Socal
Honestly it all depends on what you plan on doing with the car.

Daily driver? I'll stick with a good set of springs, panhard bar and a good alignment, no need for coilovers if you DD, just my .02. :party52:
 
Last edited:

pass1over

I like it LOW
Joined
Oct 9, 2011
Posts
1,511
Reaction score
236
Location
Trenton, FL
I've had a set of BRs on my car for about 3 years now, with the BC springs though, not the swifts. Panhard bar would be all you would need to put a BR kit in.

I put coilovers on my DD because I wanted to make the wheel gap exactly how I wanted it to be.
 

zorph01

Junior Member
Joined
Jul 2, 2017
Posts
8
Reaction score
0
Location
Virginia
I've read that people have had a little troubling accessing the caster camber plate adjustments through the ST so you might need to open up the hole a bit. Can this be confirmed?
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top