BMR Panhard keeps coming loose?

BV600

forum member
Joined
Jul 3, 2011
Posts
73
Reaction score
0
Location
TEXAS
So Ive put locktite 242 on this damn thing 3 diff times, and the lock nuts come loose and the rear end shifts to either side.
SO what locktite should I use or what am I doing wrong?
 

bigwilly43729

I do stupid shit, a lot
S197 Team Member
Joined
Jul 27, 2007
Posts
6,751
Reaction score
13
Location
Oklahoma: Not terrible
So Ive put locktite 242 on this damn thing 3 diff times, and the lock nuts come loose and the rear end shifts to either side.
SO what locktite should I use or what am I doing wrong?

Put some ass behind it and wait a little while before taking it out on a test drive. I had a problem like this with my LCA jam nuts. Put the locktite on, waited a couple of hours for it to set, then took it out. No more clunks or potential shifting.

Most will tell you that it doesn't take Locktite a couple of hours to set up, which may be true, but this worked for me. I also used RED locktite. It may not be necessary, but it helps me sleep better at night.

put some ass behind tightening the lock nuts lol...

Mine on the other hand are stuck and I cant loosen it to adjust!!

PB Blaster and/or heat (propane torch) will loosen those nuts right on up.
 

Scott_0

forum member
Joined
May 7, 2011
Posts
1,617
Reaction score
0
Location
OxFORD, Pa
Use a big ass wrench on the jam nuts, should stop it from loosening. I'm not using lock tight and mine doesn't loosen
 

BV600

forum member
Joined
Jul 3, 2011
Posts
73
Reaction score
0
Location
TEXAS
I had to use a huge breaker bar to get the lock nuts loose the last time it came loose, So im thinking I have to tighten it that way
 

fdjizm

Drag Queen
Joined
Nov 29, 2009
Posts
19,536
Reaction score
341
Location
NY/NJ
Mine are big dog crab arm tight, no locktite, they never move.
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top