Hi Guys, i urgently need your help !
First of all i will introduce myself. I'm Ayk and live in Germany. I bought a Stang in 2008 and since then i'm superhappy with my Pony.
Since last week thursday i have a strange problem on my Pony
In the morning everything was fine. I moved my Mustang out of the garage and
at the evening i faced following problem:
If i enter my car, and put in the key, the control light into the cockpit for the high beans immediately goes (but no light from the Headlights) on and the beeping starts and continues. If i turn the ignition on this remains like that. If i start the engine, the beeping stops and the High beam light into the cockpit stays on.
But what is very strange, that the Theft indicator light into the cockpit flashes ALL the time. Also while engine is running.
To summarize:
- Radio NOT working
- Dome light NOT working
- Cockpit NOT working
- headlights NOT working
- turn signals NOT working
- door locks NOT working
The engine (starting and runnng), the temperature regulations with A/C, the mirrors and the Windshield wiper works well.
here a short video: http://de.tinypic.com/player.php?v=2rogx83&s=9
I did some first analysis basing on some information from this forum...
i removed the SJB to check if i have some water inside and checked the overall board. From visual aspect, everything looks fine.
Relays are checked, and all are working well. Fuses all are ok.
On BEC all fuses are ok and in the SJB as well.
Where the confusion starts, is at the accessory delay relay.
measuring at the pins i see folowing:
pin 30 = 12V
pin 85 = 12V
pin 87 = nothing (here i should have 12V when the relay becomes active)
pin 86 = nothing ! this comes from the Low current board.
When the relay will become active normally ??
Every idea is welcome guys
First of all i will introduce myself. I'm Ayk and live in Germany. I bought a Stang in 2008 and since then i'm superhappy with my Pony.
Since last week thursday i have a strange problem on my Pony
In the morning everything was fine. I moved my Mustang out of the garage and
at the evening i faced following problem:
If i enter my car, and put in the key, the control light into the cockpit for the high beans immediately goes (but no light from the Headlights) on and the beeping starts and continues. If i turn the ignition on this remains like that. If i start the engine, the beeping stops and the High beam light into the cockpit stays on.
But what is very strange, that the Theft indicator light into the cockpit flashes ALL the time. Also while engine is running.
To summarize:
- Radio NOT working
- Dome light NOT working
- Cockpit NOT working
- headlights NOT working
- turn signals NOT working
- door locks NOT working
The engine (starting and runnng), the temperature regulations with A/C, the mirrors and the Windshield wiper works well.
here a short video: http://de.tinypic.com/player.php?v=2rogx83&s=9
I did some first analysis basing on some information from this forum...
i removed the SJB to check if i have some water inside and checked the overall board. From visual aspect, everything looks fine.
Relays are checked, and all are working well. Fuses all are ok.
On BEC all fuses are ok and in the SJB as well.
Where the confusion starts, is at the accessory delay relay.
measuring at the pins i see folowing:
pin 30 = 12V
pin 85 = 12V
pin 87 = nothing (here i should have 12V when the relay becomes active)
pin 86 = nothing ! this comes from the Low current board.
When the relay will become active normally ??
Every idea is welcome guys