Surfstang2020
forum member
That's badass man good luck with your build
Sent from your moms phone
Sent from your moms phone
New 600 Cubic Inch 1000 hp motor build
- Thread starter GI Joe
- Start date
Subscribed! Looks like a great build looking forward to the results.
Earl
Earl
...yes and I got my wiring shop manual today...LOL
prior to the paint work I made arrangements on the core support to move the radiator forward 1"
According to the measurements Paul made on his built, if I run and mandrel drive I'll have about 3" from the crank bolt. This will make it 4" He also suggested the twin fans as that leaves an open are between them at the bottom.
According to the measurements Paul made on his built, if I run and mandrel drive I'll have about 3" from the crank bolt. This will make it 4" He also suggested the twin fans as that leaves an open are between them at the bottom.
Dave if pump gas is out of the question you can always run MS103.
lito
forum member
What about E85?
Man I pretty much had my fill with E85...
true...that unleaded...I dont guess it matters which way I go...although my valve might like me better if I run aleaded gas...
I want to find out what the cheapest...I dont want to have to run 10-15$ a gallon stuff.
I know on 13:1 they reccomend like a 110 I think but that seems like waaay over kill
I'm gonna whip out my VP fuel book in a bit and look.
What part have to be changed in the carb to run E85...
I do have 100 gallons of E98 sitting in the shop..LOL
Last edited by a moderator:
LOL a drum of MS103 is around 700. Over that price range you want to be in.
ok dont know if it was noticed but I replaced the front turn signal...Got em smoked to kinda match the rear. Then I was looking at the pic of the front with no headlights in and wondered how the front headlight would look smoked Would have to do something with the Roush fog lights too ( that are now non functional)
Thoughts on that ?
Thoughts on that ?
Take the fogs out and fab up a twin ram air system for your carb. Something like this and then you could use gutter screen painted black as the grilles for the openings.
http://www.ramairbox.com/product.html
http://www.ramairbox.com/product.html
SherrodMustang
forum member
^^^^^ that would be kinda cool
BoostedGT480
Slow 3v
Here we go again! 
SherrodMustang
forum member
Hahahahahaha
BoostedGT480
Slow 3v
So Dave, are you going to run a "small shot" on there as well?
05stroker
Never enough power guy!
Once you read through it some you will see how it directs you through the entire wiring system and it becomes a priceless thing to have with these builds.
Nice job on the paint work in the bay there as well!
Here we go again!
yep and I owe a ton of thanks to you for all the "behind the scenes" help you have given...mtf on that later
Similar threads
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details
Sponsor Links
