Recent content by jas2234

  1. jas2234

    Heavy vibration on hard right turn - Ideas why?

    Do you have headers, and if so what is the clearance between the left header and steering shaft. I used to get vibrations when turning right. I had stock motor mounts at the time. I loosened the motor mount nuts and shifted motor to the right 1/8" or so. Vibration went away for me.
  2. 20161017_165952

    20161017_165952

    • jas2234
    • Media item
    • Comments: 0
    • Album: New
  3. jas2234

    Looking for help/opinions on gear choices

    Sorry for multiple posts but for some reason my phone won't let me do multiple quotes. Thanks for the info guys. Any and all help is greatly appreciated.
  4. jas2234

    Looking for help/opinions on gear choices

    I'm definitely gonna have to datalog as it seems like your buddy was/is having similar symptoms And I agree with your math. I was thinking with my current 60' I should be in the 11.7 range.
  5. jas2234

    Looking for help/opinions on gear choices

    I did change tires from mt ET street 325/50r15 to mt ET street r (bias) 28x11.5r15. Both are 28" have tried 14-18 psi no changes on the top end. Boost and rpm seem to be the same as always. 1/8th is 3-5 mph (95-97 mph)quicker but then it seems it goes to shit. I shift at 64-6500 I was thinking...
  6. jas2234

    Looking for help/opinions on gear choices

    Based off figures I felt the 4.30 were the right choice. When I said I blew the rear I ment I grenaded the factory diff and went with a trutrack this time. I do have full bmr suspension and have airlift. Been the same suspension the whole time.
  7. jas2234

    Looking for help/opinions on gear choices

    I pulled tickets that were similar DA. There is always the good and bad days. And I was trying to pull tickets that were very close. And I knew I forgot something. Tire is MT ET street R (bias) 28x11.5r15
  8. jas2234

    Looking for help/opinions on gear choices

    So long story short. Car is an 07 gt procharged 10 psi. (492/448). To start with I had stock 3650 with 3.73 gears and ran a pretty consistent 11.8-9 at 121 with 2.1 60". Last year switched over to a magnum XL with 2.66 1st gear. Was advised to switch to 4.10's. With that setup I was running...
  9. jas2234

    WTB 05-09 GT suspension goodies

    I have eibach pro kit with 10k on them. 150 shipped.
  10. jas2234

    Airbag jack

    Update. Had a chance to put my airbag lifts in action at the track this weekend. Worked flawlessly, but as stated before they do tilt especially on unlevel ground. I changed tires on left side first, ground had slight slope and when both left side tires came off ground the car did shift a...
  11. jas2234

    Airbag jack

    The bags are not off of anything particular I just did some research to find one that had a collapsed height of less than 3". The bags a are made by airmaxx. Their part # AI-AM-AB2600. It has 1/2 npt threads. You will need a 1/2 to 3/8 reducer. For the air fill line I used 3/8 air compressor...
  12. jas2234

    Airbag jack

    I made two of these. I was only gonna make one but the price of 1 bag was $50 and the price of 2 was $70. I have about $100 in both.
  13. jas2234

    Airbag jack

    Car looks great Scott! I used the right side center port on the tank for a quick release. Works great at the track when changing air pressure and airing the tires back up for the drive home.
  14. jas2234

    Airlift tank and compressor mounting

    Yes the new bolts will need to be countersunk. The straps are directly above. I used 1/4-20 stainless. As for where to mount I just measured so the tank was centered and the mounts are between the oval cutouts on the rear deck. If you need anything just let me know.
  15. jas2234

    Airbag jack

    Thanks Chris. That is true I do need air. But as Wes07 said the "Cool kids already have air"
See more

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top