Save the time and aggravation
I went thru all of it.
Learn from my mistakes
Buy the frickin GT500 Fan and be Happy
Oh and that Stainless shroud. How deep is it????
Ill bet its flat
That means it wont work worth a Shit
But hey I appreciate the fact that we all have to learn at our own pace
More good info here
http://www.s197forum.com/forum/showthread.php?t=101726&highlight=M-8C607-MSVT
Also the T stat will come out without pulling the intake if the car is 2007 or newer
If you need a link to that let me know
Fan M-8C607-MSVT
http://www.americanmuscle.com/frpp-svt-fan-assembly-0513gt.html
here is a link on a T stat
I am running the 170
http://www.s197forum.com/forum/showthread.php?t=37405
So
Now that Im back in the saddle and the car is running.
I ran a wire for the failsafe to the ECU.
But I have not connected yet.
Looking for everyone else's experience
Im almost done tuning with Lito
So im either cutting ignition at the ECU, or Connection to the WOT Box.
Anyone wired to the...
My experiance was terrible
I went with the E Bay aluminum twin 12 inch fan setup
ran hot, Upgraded to twin FFDynamics 3000 RPM Dual Ball Bearing fans, Still issues
Went with GT500 fan and a 170 T stat
All issues gone
The small Radiators on our cars need a lot of air flow to maintain proper...
Cars running good
temps are realistic
Lito has the tune almost dialed in
Fricken EBC went out AGHHH Need to find out whats going on with that
But glad the car is running good
Pulls hard and is fun to drive
Oh I have a gauge for oil pressure on the feed to the turbo , it never goes over 45...
Unilug Dark Stars ****SOLD*****
**************************************************************SOLD ***********************************************
NIB
Never mounted
Includes Black Lugs
Looking for $700.00
The ratio of any two drive accessories can be determined by dividing the diameter of the smaller pulley into the larger one. For example, if a 6-inch water-pump pulley is used in conjunction with a 7-inch crank pulley, the pulley ratio is 1.16:1. So for every 1,000 rpm the crank pulley...
Def
The Smoked Headlights are killer now that I have bleckend out the Intercooler.
Ill get em posted when all installed
One more question.
The connection for the Halo Ring on the headlights is on the bottom of the light (Split) Seems like the Fogs were on the top. or at least with the fog...