What have you done to your mustang today?

What whipple is that? I'm looking at a VMP soon.

It’s the 2.9L gen 3. I originally planned for the vmp, but TSS talked me into the whipple. You can’t go wrong with either setup IMO.

What the whole shabang end up costing you?

^^ time to loose the 3.73's - or run a 30" tire - lol. be out of gear for the 1/4 mile.

JG-1 said:

What the whole shabang end up costing you?

Click to expand...

Pm sent

bunits19714 said:

^^ time to loose the 3.73's - or run a 30" tire - lol. be out of gear for the 1/4 mile.

Click to expand...

Absolutely, 3.31’s are definitely in the near future.

I have 4.10s in mine. I'd imagine I'd have to swap gears also when I get the supercharger

Dropped off the wheels and tires today to get mounted and balance and ready to drop off at the shop working on the car. Got to love firestone being open on Sunday. Time will tell if the 325 race masters will hook or not. I like the forge star drag wheels should look good on the car. I have always been a mickey Thompson fan but wanted to go with a larger tire for 1/2 mile events than a 275 and pro's are not allowed at most 1/2 mile events.

My rears were on the tread wear marks and making a shit ton of road noise (I initially thought I was losing a bearing) so I threw on my old Bullitts I had sitting in the attic and I'll be damned if I don't like them more than the aftermarket rims. I'm sure I'll change my mind in a year or so, but I'm super happy.

Installed the new BMR rear springs and rear lower control arms that I've had for a couple/few months ... the front springs and new swaybar bushings are getting done soon. Car's still on jack stands and the weather is supposed to finally be warming up starting next week ...

Gabe said:

Installed the new BMR rear springs and rear lower control arms that I've had for a couple/few months ... the front springs and new swaybar bushings are getting done soon. Car's still on jack stands and the weather is supposed to finally be warming up starting next week ...

Click to expand...

Envy! Those looka so nice!!

Sent from my SM-G930V using Tapatalk

Gabe said:

Installed the new BMR rear springs and rear lower control arms that I've had for a couple/few months ... the front springs and new swaybar bushings are getting done soon. Car's still on jack stands and the weather is supposed to finally be warming up starting next week ...

Click to expand...

Didn't you hear we are getting another Nor Easter?

Tore down for cams and installed my 4.30 gear set

travelers said:

Didn't you hear we are getting another Nor Easter?

Click to expand...

Oh yeah I heard. When's a better time to work on the car in the garage than when it's snowing outside?

Gabe said:

Installed the new BMR rear springs and rear lower control arms that I've had for a couple/few months ... the front springs and new swaybar bushings are getting done soon. Car's still on jack stands and the weather is supposed to finally be warming up starting next week ...

Click to expand...

Hey I did that same job last year. BMR springs and LCA's. I like those springs a lot.

Last night I got my exhaust more or less all back on. Looks like it will line up much better with these headers than the old ones.

Too bad we're supposed to get 2-4" of snow between tonight and tomorrow, and the weather's not getting better for awhile. Sigh

RocketcarX said:

Tore down for cams and installed my 4.30 gear set
View attachment 66933

Click to expand...

Curious, why'd you tear it down so far for a cam install?

After washing it this weekend (I knew it was going to rain but I just couldn't stand it any more) I noticed that my bumper cover was off above the side marker lights. Turns out the tab on both sides was under the lip instead of on top. Don't know how I missed that initially. I was able to get the screws out with a stubby screwdriver without having to remove the wheels.

Gabe said:

Oh yeah I heard. When's a better time to work on the car in the garage than when it's snowing outside?

Click to expand...

Your right, mine is still in storage till the end of the month.

ghunt81 said:

Curious, why'd you tear it down so far for a cam install?

Click to expand...

Delete plates

Gabe said:

Installed the new BMR rear springs and rear lower control arms that I've had for a couple/few months ... the front springs and new swaybar bushings are getting done soon. Car's still on jack stands and the weather is supposed to finally be warming up starting next week ...

Click to expand...

Gabe, those BMR springs with LCA's are awesome. IIRC weren't you running Steeda sport springs? Just curious if the BMR's are considered a higher quality spring over the Steeda sport springs

ghunt81 said:

Hey I did that same job last year. BMR springs and LCA's. I like those springs a lot.

Last night I got my exhaust more or less all back on. Looks like it will line up much better with these headers than the old ones.

Too bad we're supposed to get 2-4" of snow between tonight and tomorrow, and the weather's not getting better for awhile. Sigh

Click to expand...

Weather-wise, we're pretty much in the same boat, as we're expecting 1-3" of snow between tonight and tomorrow morning lol.