spring cleaning time CAUTION LOTS OF PICS

mrt2you

forum member
Joined
Jan 20, 2014
Posts
542
Reaction score
27
Location
new berlin
i have a LOT of parts laying around that i have no use for any more.
ALL PRICES ARE PICKED UP IN NEW BERLIN WI 53146 zip. i live 1 mile off I-43 and racine ave exit.
NO I WILL NOT SHIP. selling parts CHEAP and will be worth your time to pick the parts up.

GT500 parts
1 block from a 07 basically complete with crank, 7 rods and pistons,oil pan, oil pump, oil pump pickup, and lower timing chain gear. 1 rod didn't want to stay in the block and made a hole in the sidewall.

1 bare 08 GT500 block with main caps and nothing else. a few pistons melted down and scored the side walls. should be able to clean up with a bore job.

15 pistons and 16 rods. some pistons are melted. some pistons are from the bare block and some pistons are from a 2011 block i bought. there should be enough good pistons and rods to make 1 motor.
https://imgur.com/PWEVNEu
https://imgur.com/hqB3KGD
https://imgur.com/bN8llmA
https://imgur.com/FQ2IrVP
https://imgur.com/WxYufDF
https://imgur.com/qcou25d
https://imgur.com/8rOtzM0
https://imgur.com/qCX9v4P
https://imgur.com/KqVu5OK

$200 PICKED UP for both motors, pistons, rods, and the engine stand.

07 GT500 low miles complete struts and rear shocks from a 07 convertible
https://imgur.com/keeaFvV
https://imgur.com/6R4gdkT
$50 PICKED UP



1 GT500 bottom of hood insulation pad
$25 PICKED UP
https://imgur.com/8u1f6Mi
https://imgur.com/uLfdNpi

a set of 18" goodyear F1 tires. 2 p255/40/18 and 2 p285/40/18
$50 for the set of 4 tires PICKED UP
https://imgur.com/r5JKR3O
https://imgur.com/uxLYCE5
https://imgur.com/7icmd3D
https://imgur.com/4BE3A1I
https://imgur.com/BetLjBv

GT PARTS

i have a alloy block from a s197 mustang. it has no main caps but i found some laying next to them. not sure if they are for this block but you should be able to use them. includes windage tray.
$150 PICKED UP
https://imgur.com/zM0lnrL
https://imgur.com/0hoMV7J
https://imgur.com/euRHr5P
https://imgur.com/lu9PEeD

2 stock air intake boxes $15 PAIR PICKED UP.
https://imgur.com/677Mip1

stock 4.6 intake manifold with cm plate and motor $25
https://imgur.com/ASNA8Jl

FROM a 2012 GT ht. complete stock suspension. front struts, rear shocks, front and rear sway bar, panhard bar and all of the bolts and brackets to mount them.
https://imgur.com/wIKeE6L
https://imgur.com/fm1GYsT
https://imgur.com/xfOi03U

$75 PICKED UP


lincoln mark VIII parts.

i have a coil over conversion suspension with both front knuckles. a pair of exhaust manifolds, fuel rails with injectors. pressure regulator and a power steering pump.
https://imgur.com/3pNzFuy

$25 for everything

i have a core 4R70 auto trans with torque convertor. i think it was removed from a 02 mach 1 mustang.
$100 PICKED UP
https://imgur.com/Kbq6vO2
https://imgur.com/9cxxZWf
https://imgur.com/BsiQYyr
https://imgur.com/dVQB27z
 

mrt2you

forum member
Joined
Jan 20, 2014
Posts
542
Reaction score
27
Location
new berlin
all prices are PICKED UP in new berlin wi 53146 zip.
i live 1 mile off the I-43 and racine ave exit in waukesha county for easy access.

the amount of time i would have to spend shipping and the $$ i get for it isn't worth shipping to me.
i can arrange to deliver the parts to the iola swap meet in july. i have been selling parts there for the last 15 years.
 

mrt2you

forum member
Joined
Jan 20, 2014
Posts
542
Reaction score
27
Location
new berlin
over 300 views and no one wants to get a smoking deal?
how about this deal $550 for EVERYTHING listed picked up. the price is taking EVERYTHING. if you don't want everything the price is what quoted earlier.

that price is about $.25 on the $1.00 for what it's really worth.
 

mrt2you

forum member
Joined
Jan 20, 2014
Posts
542
Reaction score
27
Location
new berlin
the 2012 suspension is SOLD.
some NEW lower prices.

both GT500 blocks, rods and pistons $100
s197 alloy block without main caps. the bores are fine you still see crosshatch marks. $100 picked up
2 stock air cleaners $10
1 stock intake with the change motion plates and wiring still on it $20


i can deliver the parts in the I-94 S27st area. i am down there every weekend.
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top