Search results for query: *

  1. whippledpony

    Swaping TR6060 complete tranny from an 11 GT500 into my 08 gt what need to be done

    i know the tranny cross member, clutch, shifter all need to be replaced to get tranny to go in, i already have an 8 bolt crank, i guess my main question if i am gettting everything strt from that gt500 would it jst be a direct swap in and would a ford racing short throw shifter from an 07-09...
  2. whippledpony

    WTB: TR6060 swap parts for 08 mustang GT

    looking for TR6060 tranny swap parts, i have the tranny jst need everything else car already has an 8-bolt crank and flywheel as it had a forged rotating assembly put in Need: Shifter assembly tranny cross member GT500 clutch GT500 drive shaft and anything else that is needed for...
  3. whippledpony

    no pics no thread

    i will be posting pictures here soon thanks not an acceptable practice - post properly or wait until you can see post #4 http://s197forum.com/forum/showthread.php?t=61060
  4. whippledpony

    Bad sunday night, got car back from shop got on it and caused some damage to rear end

    i took the car out for a strole and got kinda antsy so i drop it down to first at about 15mph and stomp on it, next thing i hear is a huge clunk, and than the car is no longer moving engine is on, but cant get it into gear, so had to tow car home, got underneath car and looks like where the...
  5. whippledpony

    Wtb 3v block

    In search of a 3 valve block
  6. whippledpony

    WTB: Used Ford Racing 62mm TB for 08 mustang

    im looking for a good deal on a used ford racing polish 62mm throttle body for my supercharger
  7. whippledpony

    WTB High pressure fuel rails

    want to buy some high pressure fuel rails and hose kit, let me know what you got
  8. whippledpony

    Pic of the Blown Stroker motor! cant wait till its in and sounding mean

    finally got the stroker motor all put together with the headers and blower on top, hope this one last more than a 1000 miles before it blows unlike the last two engines, i would like to thank you all for the great help i have recieved on this site on getting this project finished
  9. whippledpony

    Used Siemen Deka 60lb injectors

    i have some used 60lb injectors that are not gonna work for my application cause they are to tall, my loss is your gain asking 280 shipped for these bad boys
  10. whippledpony

    3v found to be leaking by machine shop

    i took my heads in to get checked before the motor starts to get completely put back together and come to find out that some of the valves are leaking on both heads, what i cant seem to find is parts online or dont really know what to look for as far as a search, i know it consists of guide...
  11. whippledpony

    Ordered MMR motor mount adapter plates for teksid swap

    i ordered the mounts from MMR as they were the only ones to have some in stock, called JPC and SHM and no one had them in stock and didnt know when they would have them in stock, well i jst got them yesterday and only got one in the box, what my question is, should there be two plates or jst one...
  12. whippledpony

    What pulley is needed for 12lbs-14lbs of boost on a whipple?

    i have an 08 mustang with the whipple HO blower, and want to up the boost from 10lbs to 12lbs or 14lbs, already have a forged block, jst want to know what is the best way to achieve this amount of boost
  13. whippledpony

    What ARP head studs do i use for 3v heads on teksid block?

    i am jst wondering what arp head stud kit to use one my swap, the 2v/4v kit or the 3v kit? Only reason i ask is because the block is originally a 4v block but the heads are 3v so i am wondering if its the same or different to the block from the heads is all? if you guy can give me part numbers...
  14. whippledpony

    What ARP head studs do i use for 3v heads on teksid block?

    i am jst wondering what arp head stud kit to use one my swap, the 2v/4v kit or the 3v kit? Only reason i ask is because the block is originally a 4v block but the heads are 3v so i am wondering if its the same or different to the block from the heads is all? if you guy can give me part numbers...
  15. whippledpony

    New 5.0 stroker build (finally)

    As some of you might know, ive had a tough time getting this build started as i had to go through a few hurdles to even get my built shortblock, in the past year i have had some bad luck with my car, i blew a window through my block in may of this year do to hydrolocking, than i replace that...
  16. whippledpony

    So my bad luck continues!!!! Need a place to vent..sorry guys

    So for the last month i have been very excited found a great deal on craigslist on a built short block for my already expensive rebuild of my car if some of you dont know i was taken for a fool in my first engine replacement that ended up costing me around 7 grand! That lasted all of two days...
  17. whippledpony

    New Build in the works going from stock 4.6 to a blown stroker 5.0

    :thumb2:I will be starting a new build for the winter in the past year i have had some bad luck with my car, i blew a window through my block in may of this year do to hydrolocking, than i replace that motor with a stock used motor that was supposed to be good and got ripped off by mechanic who...
  18. whippledpony

    WTB a Stock or Built Short Block

    hello everyone i am in search of a low milage short block stock or built my budget is at 1800 dollars have a bottom end noise my mechanic said the best thing to do is to buy a short block and swap my heads over, i have already been through two motors this year and jst recently found out i have...
  19. whippledpony

    WTB Boss 302 Intake Manifold

    i would like to find a good deal on a used Boss 302 Intake manifold for my F150 let me know if you know anybody wanting to get rid of one
  20. whippledpony

    Whipple Intake Intercooler can it be repaired?

    i guess my intercooler on my whipple has a hole on it, are these possible to get fixed by a radiator shop or will the only fix be to order a new one
  21. whippledpony

    What size are a 2008 GT500 fuel injectors from the factory?

    wanting to know how many pounds are the fuel injectors of a 2008 gt500
  22. whippledpony

    What is a good clutch for my set up for around $500?

    i want a better clutch for my car, here is my set up Whipple Supercharger with the 3.75 pulley gt500 dual fuel pumps 47lb injectors flowmaster axle back exhaust working on getting a tune either from vmp tuning, brenspeed, or lund racing dont know who to go with but my budget is 500...
  23. whippledpony

    who is the best for custom mail order tunes for superchargers

    who has the best bang for the buck when it comes to mail order tunes for supercharged applications plz give me your imput s197 nation....my car is whipple charged and want a custom mail order tune
  24. whippledpony

    Whats the difference between the 05-07 4.6 to the 08-09 4.6

    i have this question because i blew up my motor and found a good deal on a motor out of an 07 for my 2008, i have herd that there is something different in the motors from one year to the next....any help would be greatly appreciated
  25. whippledpony

    How low can i lower my car with 255/35/20 tires in front and 305/35/20 in the rear

    how low can i go with this tire set up 255/35/20 in front 305/35/23 in rear any help would be great

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top