Search results for query: *

  • Users: Seven
  • Content: Threads
  • Order by date
  1. S

    Best rear view camera option to use with SCT Live wire?

    I'll probably buy a live wire to install my tune on my '14 GT since it didn't come with a rear camera. Was wondering what model you guys used and how the results were? Thanks!
  2. S

    FS - Used but Usable Kumho V710 Slicks - 285/30-18

    Got these with a set of wheels I bought for a different car. They are in good condition but used, they're on the wear bars but being slicks that means they can be used a little longer. I have no use for them but they could be used for 1-2 more track days (perhaps more if you used the Pegasus...
  3. S

    New in box S197 parts - Steeda Ultralites, MM Camber Plates, Injectors, etc!

    New in box S197 parts - Steeda Ultralites, Airaid, SCT X3, Injectors, etc! Bought this stuff and ended up going in a very different direction... *edited post to show remaining items only!* New items... 3 pairs of Speed bleeders - $40 shipped - this is 6 bleeders which is the amount you need...
  4. S

    My last 10(ish) days... v.Car show and endurance race... and Boss302

    So in the last 10 days or so I've been pretty busy with car-related fun. Figured I'd share with you guys... First off was the Exotics at Redmond Town Center, then I pit-crewed (along with my g/f) for a longtime old friend's Porsche 944 endurance car in a 6 hours race at The Ridge in Shelton...
  5. S

    2011 GT500 injectors... 47lb low miles

    SOLD
  6. S

    Did I buy the wrong injectors? pic inside

    Doing an injector swap on my '13 Boss 302 I pulled the first injector out of the rail and compared it to the 47lb'er I bought. The left is OEM, right is a 47lb (out of a 2011 GT500)... Will this work, or do I need a "taller injector" ? Basically I need to know... do 2011 GT500 injectors work...
  7. S

    Tools needed for injector swap on a Boss?

    So I need to swap in 47lb injectors (to run E85 for track events), haven't ever swapped injectors on anything other than an LSx but I can't imagine 5.0s are a ton different. I looked for a DIY and didn't find one, but I get the basic idea, I'm more worried about what tools I need because I have...
  8. S

    Anyone bought the AM Rear Seat Delete and used it with the Steeda X-Brace?

    Does the brace stop you from installing the cover? Any issues? I'd like to get rid of the rear seat, add some stiffness and still keep trunk noise out, if this all works, it should fit the bill and be way cheaper than the OEM Ford Boss LS X-Brace.
  9. S

    Will this fit my boss 302 V.exhaust

    Looking for some more sound. Only really want an axle-back for now as the piping from the H-pipe is already 2.75 anyway. Wondering if I'll have bumper/fitment issues http://www.americanmuscle.com/heartthrob-flowpack-axleback-1112gt.html *edit* Basically I should ask, is the Boss 302 (Non-LS...
  10. S

    Aaaaaand the mods have begun...

    *edit* Guess this will end up being my Build Thread for my 2013 Boss 302... Started with a tune from AED - Shaun is an awesome and funny dude Just went out for cold meds for the gf... Pulled out of our street unintentionally sideways, hit second in hopes of straightening it out and it got...
  11. S

    WTB - Used GT500 Mufflers (2010-2013)

    WTB - Used GT500 Mufflers (2013) My car is a 2013 and I'd like to buy a used set. Seems like American Muscle sells them new for $310+shipping. With that in mind, Let me know what you'd want for yours :)
  12. S

    "GT" power outlet cover - cost of shipping!

    So I was given this by another forum member when I bought an SCT product from him - Very nice of him!. It's very cool but I have a Boss 302 so putting something that says "GT" in the interior is a little out of place. Rather than look a gift horse in the mouth or keep it on a shelf somewhere...
  13. S

    Verify fitment for me please?

    Here's a link to the wheel http://www.elementwheels.com/proddetail.asp?prod=TSW-mirabeau2010gblk Would be doing these on my 2013 Boss 302, which I know anything that will fit a 2007+ GT500 will fit my car, but will +40 offset be enough? Thanks! *edit* - Looking to run 20x10 square only... not...
  14. S

    WTB - 47lb or larger injectors...

    As it says, need a set of 8 for my Boss 302 Thanks!
  15. S

    Lurker for a while, finally bought one... 2013 Boss 302

    Hey all, I've been into cars for a while now, I previously lived in the Philly area and after living in Albuquerque NM for a couple months I moved to Seattle to take a job. Just bought a 2013 Boss 302 in Performance White and have some mods planned for it. I'm a long time HPDE/Track guy so I...
  16. S

    Pics of my new car, the gf's car and some WA mountains...

    Pics from this weekend in Snoqualmie... My '13 Boss and her '13 Focus ST...
  17. S

    Header fitment on a 13 BOSS?

    First off if this doesn't qualify as "tech", I'm sorry - I figured fitment would qualify. I see a lot of sites noting fitment for 11-12 Mustangs for headers but not for '13s, just wondering if the sites weren't updated yet or if the 2013 (specifically the Boss 302 - which I own) is truly...
  18. S

    2013 Boss 302 wheels/tires for sale

    SOLD
  19. S

    Boss or Boss intake owners... 2011+

    Was wondering if you guys had seen gains with the 90mm throttle body and if so, about how much? Dyno charts appreciated Basically I'm figuring in mods for my BOSS and I plan on doing intake, headers/exhaust and a throttle body (if it's worth the money) and it doesn't look like you can do...
  20. S

    n00b cooling and power questions regarding a '13 GT

    So I just sold my C5 and I'll be looking to replace it with either an '06-'08 C6 Z51 6MT or a Factory ordered '13 GT Base model 6MT with Track, Tech, and Recaro packages. I'm going to be moving to WA. So I will have a beater to drive in bad weather so please don't bother with any discussion on...
  21. S

    Question regarding amplifying the stock 4 speaker system and keeping stock h/u

    So I'm going to be purchasing a base 2013 GT with the Tech package. As such, the car will have the four 6x8 speakers and the SYNC headunit. I want the headunit to stay as I like it, however I want to swap the 4 speakers and preferrably amplify them. What do I need to tap into the stock headunit...
  22. S

    So why don't 10in wide square setups work?

    I was checking American muscle looking at some 18x10s figuring I'd run 4 of em for track wheels and they have them listed as "rear only". I'd like to stay away from a 9in wheel if possible, just curious if you guys can tell me if there's a specific reason a 10 won't work up front, and if...
  23. S

    Did anyone here lease a new 2013 GT?

    If so what did you put down and where were your payments? Trying to determine if it'll be in my budget. I don't keep cars long so leasing has always been the way to go for me if its a new vehicle.
  24. S

    Best bang for the buck mods? (2011 5.0)

    I'm sure this has been asked but why not put a sticky up so people know how much of a gain and how much can be spent. From what I've read it seems like the following is ideal... Intake - $150-350 - Gains are 10-20hp 302 manifold - $450 Headers - $600+ X-Pipe - $250 Tune - $varies by tuner -...
  25. S

    FRPP suspension package?

    Its pretty cheap list price and comes with the sway bars, etc Just wondering if you guys think its worth it for a very light (but mostly street) track setup? I figure add a panhard bar and you're done But what else would you recommend? I'd like to get a panhard bar and sway bars with...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top