Search results for query: *

  1. Roadracer350

    What size Front sway bar are people running for autocross?

    I like my Whiteline https://whitelineperformance.com/ford-mustang-s197-front-sway-bar-33mm-heavy-duty-blade-adjustable-bff55z
  2. Roadracer350

    Review: Track Spec Hood Louvers

    I still drive mine on the street some but we do not have state inspections here. If you do then this set up wont work due to not only does it remove the horn it also removes the clock spring. The turn signals still work you just have to return the stalk by hand.
  3. Roadracer350

    Review: Track Spec Hood Louvers

    AIM dash
  4. Roadracer350

    Review: Track Spec Hood Louvers

    I bought the Sparco Hub Adapter from Sparco for 100, The quick disconnect from Watson racing for 100 and the Ford racing wheel from a local shop new for 230.
  5. Roadracer350

    Review: Track Spec Hood Louvers

    That's what I am doing is installing 4 Aero Catches across the front of the hood
  6. Roadracer350

    Review: Track Spec Hood Louvers

    What about running hood pins like the Aero Catch? That should stop flutter all together.
  7. Roadracer350

    Review: Track Spec Hood Louvers

    Now is that measurement for the hoods with a hump or the flat hood of the 05-09?
  8. Roadracer350

    Review: Track Spec Hood Louvers

    Just wondering why not put them closer to the front of the hood that way you could do a small duct to pull hot air out of the radiator? Car looks great!
  9. Roadracer350

    Time to replace Ball Joints

    I swapped from Whiteline over to the Howe Racing NASCAR units from Watson Racing. A little PITA to install but not hard. Defiantly worth it! Super easy to replace and not that expensive.
  10. Roadracer350

    Suspension Modifications - Strut Tower Questions

    Road race guys do it all the time
  11. Roadracer350

    Suspension Modifications - Strut Tower Questions

    Vorshlag has a tool you can rent that centers up on the ST and you can use whatever size hole saw you want.
  12. Roadracer350

    jake_zx2 PURSUIT OF A 8 MINUTE NURBURGRING LAP

    Cool lap but you are off the gas so much that right there is your 8min lap when you take into account yellow flags. When you let off the gas you should be immediately in the brakes and when off brake you should be right back in the gas. No delay. Get some better pads, brake cooling ducts and...
  13. Roadracer350

    Upgrade sway bars?

    How did they use them as testers? All products were tested before releasing just as BMR, Strano etc does. For the small amount of failures they have had (which is very low)they fixed everything just as with any other company. Are you going to say that BMRs A arm failures were testing? No. BMR is...
  14. Roadracer350

    Upgrade sway bars?

    Both of those issues (if you read the thread) were fixed free of charge to the customer by Whiteline. :clap:
  15. Roadracer350

    Upgrade sway bars?

    A ton of GTA guys run their stuff and post faster lap times than most of us. Some of them are even runnin... Dare I say their name... BC coilovers!:omfg:
  16. Roadracer350

    Upgrade sway bars?

    This is true but "Why" I have no clue. I don't think the OP has a vert tho.
  17. Roadracer350

    Upgrade sway bars?

    I can understand but that does not sound like them especially from all of the dealings I have had with them and their reps. If you offer to buy a part and them not sell it to you...
  18. Roadracer350

    Upgrade sway bars?

    Did you contact Whiteline directly with your issues? Your statement is completely 180deg from any and all support I have received from them. In fact you are the first person I have came across that has said that be it contacting them about an issue or support. All instructions I got with all of...
  19. Roadracer350

    Upgrade sway bars?

    Yes their Ver1 UCA was garbage but as stated they were redesigned and shipped to customers for free. Have only heard of 1 or 2 issues with the watts and Whiteline covered them. As for your issue not sure what happened but just because a U bolt fails does not mean their parts are junk. Every MFG...
  20. Roadracer350

    Upgrade sway bars?

    Please explain? I run Whiteline bars front and back, beat the snot out of them every chance I get and never one issue. As a matter of fact 90% of my suspension is Whiteline and not one issue with any of it. Jump curbs, rough tracks and some off-track excursions plus street use from time to time.
  21. Roadracer350

    Upgrade sway bars?

    Check the Whiteline bars out.
  22. Roadracer350

    Tiger Racing Hood after 1 year = :(

    Now this is what I want to do! This is like the red beast correct?
  23. Roadracer350

    Thoughts on MMR headrest camera mount?

    If you have a harness bar or cage use the GoPro roll bar mount or a suction cup. Not sure about this one... If you got into a crash and this thing swung around it could smack you in the face, but on the other hand that would be a sweet vid!
  24. Roadracer350

    09 GT Road Race/Autocross Build

    Bro, like everyone else here throw that list in the trash. Get you some good adjustable front and rear sways, good shocks and struts or coilovers , good tyres and brakes. If you cant afford the GT500 Brembo upgrade (should if you stop trying to buy junk) put in some good pads and maybe the...
  25. Roadracer350

    Harness Choices?

    If I was doing a harness bar I would go with this.. http://shop.watsonracing.com/ROLL-BAR-MUSTANG-2005-14-p/wr-boltincage.htm

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top