Search results for query: *

  • Users: stang910
  • Content: Threads
  • Order by date
  1. S

    Help me get down the track

    Keep in mind I'm trying to keep the car as streetable as possible. Suspension mods are all BMR, drag springs, upper/lower control arms, upper bracket (top hole), lower control arm relocation (middle hole), rear sway bar (stiffest setting), viking shocks, and strange struts. Diff is a trutrac...
  2. S

    WTB adjustable panhard bar

    Looking for poly ends only. Just seeing whats out there before buying new.
  3. S

    6r80 conversion

    I'm dumping the MT-82 in a couple months cause I got a deal on an auto. Can somebody give me specifics of what needs to be done to make the auto ecu work in my car. I pm'd racerat and was told I'll have to have the IDS hooked to the car, but what exactly is the IDS doing to make the ecu accept...
  4. S

    WTB Direct drill Racestars

    Looking for 15x10's 7.5" BS. I'm also interested in tires as long as they are 28" DOT bias plys. Vendors are welcome to PM me also cause if I can't find a used set I will be buying new around the 1st of the year.
  5. S

    Paxton 12psi dyno

    Our club had a dyno day at Fastlane Motorsports today and I put my car on the dyno for the first time since the new setup. My mods are Paxton with a 3.6" pulley, Boss shortblock, Boss valvesprings, OR-X, GT500 mufflers, and open element air filter. SAE my car put down 742 hp and I don't remember...
  6. S

    '11/'12 and '13 block differences

    I'm in the process of building a Boss shortblock and I've run into a few snags along the way that has kept me from finishing my build. I hope this helps someone that may be planning a build in the future. I really wish I knew of these differences from the beginning as it would have saved me...
  7. S

    WOT AFR problem

    A friend of mine has a turbo 05 and it has been running fine for the past year. Here lately under WOT the AFR wants to stay around stoich. What could be causing this? FPDC never goes above 75% and rail pressure holds fine at 39 psi. The mods on the car are HP turbo, mafia, BAP, and 39lb...
  8. S

    Painted my 5.0

    Black is just too hard to take care of and all the small scratches were getting to me so I needed a change.
  9. S

    2011 mustang vid

    A buddy put this together for me. 6o7YXIh60Bk
  10. S

    Another 11 runs 11's

    I made 4 passes tonight. The first pass I was getting a feel for the track and ran a 12.06@114. Hot lapped the car and went 11.94@107. The MPH was low on that pass cause I missed 5th gear and coasted across the line. I let the car cool for about 30 mins and ran 11.92@115. The last pass of...
  11. S

    2011 JLT intake and BBR tune

    I never did get a baseline pull to see the gains, but everyone knows most dyno around 365 rwhp stock. My only mods are JLT intake and BBR 93 octane tune. My car put down 404rwhp and 386rwtq. I'm really impressed with the JLT intake and BBR tune. I'll post the dyno sheet when I get it scanned.
  12. S

    Stock 2011 GT

    Took my newly purchased 5.0 to the track last night hoping to run a 12 second pass. Except for an axle back and lowering springs the car is completely stock down to the 18" tires. I also have the 3.73 option. Track was really sloppy last night and if I tried to get somewhat aggressive with...
  13. S

    Here's my 2011

    Mods so far are tinted fog and taillights, lowered, painted wheels, and Hushpower axleback. WKSYY4q8rZs
  14. S

    WOTBOX problem

    Went to have my car dyno tuned and the WOTBOX wouldn't let my car rev over 6400 rpm. I tried everything from adjusting the software to turning the box off and nothing helped. I finally returned all the wiring to stock and I was able to rev the car to 7000 rpm. I'm wondering if the issue is...
  15. S

    TPMS sensors

    Does anybody know if the 2011 uses the same style sensor as 05-09. I'm getting a 5.0 soon and need to know if my current tpms sensor will work with the new car since I'm going to put my aftermarket wheels on the 5.0.
  16. S

    GT500 pump issue?

    Had my car dyno tuned today and it put down right at 500 rwhp on a dynojet. Around 6500 rpm my pumps went flat in the datalog. I don't know what the duty cycle was because my tuner just showed me the graph where the pumps were no longer able to support anymore fuel. So we didn't even attempt...
  17. S

    90mm tensioner pulley and 10% overdrive

    I'm currently running a IW 10% overdrive and I'm trying to take up some belt slack. It doesn't look like I have enough room to put a 90mm idler pulley on the tensioner with the overdrive. Has anyone done this or attempted it? Just trying to find out before I remove the tensioner and rearrange...
  18. S

    SCT ba-5000 or Mafia

    Gonna get one soon, but is one better then the other? Not looking to make crazy hp #'s so either would work well. Do tuners prefer one over the other? I know the Mafia is cheaper so if its just as good and reliable as the ba-5000 I'll probably go with it.
  19. S

    Powerhouse ds and cobra pinion flange

    Just installed a 6060 and I'm currently using a 3650 Powerhouse driveshaft. I checked for binding and the suspension has to be totally bottomed out for the driveshaft to cause any problems. Anybody know if I can use a 03-04 cobra pinion flange to get rid of the driveshaft adapter? This should...
  20. S

    tr6060 and cruise control

    I just installed my 6060 and tried using cruise control in 5th and it didn't work. Works in all other gears, but 5th. Anybody have this problem?
  21. S

    Whipple 3.25" 8 rib pulley

    Anybody have one laying around?
  22. S

    stock whipple MAF

    Anybody know around what rwhp the stock whipple MAF will max out at?
  23. S

    2010 GT500 clutch

    I'm putting a 6060 in my 07 soon and I'm thinking of getting the 2010 GT500 clutch setup. I know I need the flywheel, clutch and the new style slave. Is this gonna be everything I need to convert to the 2010 clutch? I'm also tossing around the idea of getting a Mcleod RXT, but I prefer OEM...
  24. S

    60ft. w/3.55 gears

    I'm going to be going down to 3.55's to help with traction on the street, but I'd like to be able to 60ft. in the 1.5x range. Anybody here with a full weight street car and 3.55's have consistent 1.5 or low 1.6 60's?
  25. S

    8 rib whipple pulley

    Are the the 8 rib whipple pulleys specific to our cars or can I just use one the was made for 03-04 cobras with a whipple?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top