Search results for query: *

I posted a couple weeks ago about how I had a squeak coming from my rear passenger wheel area. Well turns out I have a bent axle. It's crazy, because I've never launched the car that hard. I'm going to replace them with some mosers I guess. It looks like they are the way to go if I just want to...

Bent one, so I need replacements. Just looking to stick with 31 spline, so I can fix it quick. Let me know what you have. Thanks.

Ok guys, my 2011 has a noise coming from the rear passenger side brake. When I lightly press the brake pedal it's a squeak..squeak..squeak.. But when I press the brakes harder it goes away. It does the same thing when I turn to the left.. But only when I turn left. I just replaced all four...

Maybe some of you guys can answer this for me.. My Paxton car has a Lund tune with the timing locked at 16°. I had it remote tuned back in October and it was like 30° outside, and when we were finished my air fuel was perfect around 11.5-12.0 when at wide open throttle. Well today I took the...

Had some decent air, I ran it on slicks, but didn't leave really hard just because I don't want to hurt the trans or the stock clutch. Best 60ft was a 1.59 and the car went a best of 10.82@132. Ran a couple 10.90's passes at 131-133 mph also. I'll be going back really soon when there is...

I'm changing my belt on my 2011 with a Paxton on it, is it easiest to remove the head unit? I need to remove one of the idler pulleys on the blower bracket, but it's a bitch to get to. Just wondering if anybody had any tips

I'm having trouble posting my datalog from a pulley switch. Can I email it to someone and get them to post it for me? I want opinions on if I need a une revision to add fuel.

I'm up in the air between two tires. I have asset of 17" race stars and I'm needing a taller tire. I'm looking at the M&H 295/50/17 and also looking at the Hoosier 29x10x17 drag slicks. Anybody used either of these? I thinking the slick will be better for my application (700 + rwhp stick shift)...

Selling my Mickey thompsons. They MAY have 200 miles on them, and they have 3 burn outs from the drag strip Friday night. They are almost new, and if I hadn't done the burn outs they pretty much would be. I didn't fry them, and there's still a ton of tread left. The only reason they are for sale...

So my laptop crashed, and I can't data log for now. Well I have an aeroforce gauge in my car, and it seems to be pretty close with sct live link. I went to the track last night and according to the aeroforce it was running pretty fat.. I was running my Lund tune that was put on the car in...

Had this in my car, but switched to a different style. It's 100% perfect, and has no issues. It comes with everything just like it would if you bought it new. Tubing/fittings/lights etc.. $25 shipped

Hey guys, I hate to do this, but I've got some pretty bad stuff going on right now, and I need to make some money pretty quick. I've had this brand new RXT sitting in my closet for a while now just waiting for my stock clutch to go out. Well right now I'm in a bad spot, and need to move this...

Selling the silver boost gauge in this pic. (The one in the pillar pod) I bought black matching boost and fuel pressure gauges and am switching things up a bit. I don't know why, but when I shut the car off the boost gauge goes to zero then moves just Bove the zero mark. It works fine, and I...

I bought these but have decided not to use them. They have never even been out of the box.. Cost around $250 from American muscle, I'll take $200 shipped.

2011 Paxton @10 lbs Long tubes Off road x Cat back ID 1000's w/ BAP Factory 3.73's Boss intake Lund tuned @ ? (Made 620 on JDM tune but switched to Lund) pump gas 2013 Roush @10lbs ID 1000's w/ BAP Catted x pipe Gt 500 mufflers Factory 3.31's VMP tuned @ 589 hp pump gas...

Hey guys, I put my stock grill back in my car, so I have this one for sale. It's perfect with no broken tabs. I have almost all of the little metal tabs that help hold it in.. I may have lost one or two, but I'm sure they are super cheap. May even be able to find some at auto zone. You will also...

Never had it before.. But I switched to amsoil over the winter, and today is the first time the car has gotten really hot. I was in a lot of stop and go traffic and it was a scorcher today. And while at a light I heard it.. I'm about to check my exhaust, but just by listening is sounds like it's...

Guys, I have the eibach pro kit on my car, I like how the front sits.. Just over 28" from ground to fender. But there's a little too much rake for me.. Rear is 30" from ground to fender. I'd like to lower just the rear about 1" to get it a little closer, but don't know what spring to go with...

I've read some different opinions on this but wanted to see if any of you guys had any real world info for me. So I drained the crap grey gear oil from my 11. I had a brand new bottle of royal purple 75-140 gear oil. (The one with the friction modifier in it ) and half a quart of amsoil gear...

Need some help guys, I'm working with Lund getting my Paxton car tuned, and I sent some logs Friday, and he sent a revision this morning. Well I did more data logs, and he just emailed me and said the idle trims cleaned up, but that now the neutral rev trims are off, and suspects I have a leak...

I have a brand new clutch kit that's been sitting on the shelf for 6 months. It's a Mcleod RXT with steel flywheel for a new 5.0.. I have a gun that came up that I'd really like to pick up, but don't really have the free cash to spend right this second. So I'm thinking about parting ways with...

Is there any real value to them if they are locked to a specific vehicle ? Reason I as is I picked up a blank SCT tuner and got a tune for my 6.0 diesel last year. I have since sold the truck, but still have the tuner, and never returned the truck to stock. I know, or at least think I know that...

My car feels so much better now! The Barton bracket makes a huge difference in shift quality, and the strut tower brace makes the car feel so much more stable. Two very good mods for the money! Anybody considering either of these should definetly get them!

I've searched around, and I'm thinking I will probably just buy the MT 305/35/19's for my car, but what other options are there for a 19x10 wheel ? I've seen the nitto and bfg's in a 295/35/19, but I dont know how well they would hook being that my car is over 700 rwhp. Are there any other...

I have a set of 17x9.5 race stars with Mickey Thompson 295/40/17 drag radials and a set of 17x4.5 direct drill race stars with M&H 185x55x17 front runners mounted on them. The wheels are in perfect shape, no curb rash or dents etc.. They were only mounted up at the track, and are in like new...