Search results for query: *

I am starting my own thread on this because the ones I've seen here and elsewhere mention issues unrelated to my problem or the thread never found closure. Here's what I've done so far to attempt fixing this: I've replaced the alternator with a TYC brand, and the battery is a two year old...

Looking for stock cams (and the phaser gears too if possible) for a 3v 4.6. Located in 30024.

Prices include shipping and PayPal fees. Maximum Motorsports double adjustable panhard for 2005-14 Mustang GT. $100 SCT X3 handheld unmarried with three unlocks left. $180

I was doing some searching on a fix for P0340/0344/0345/0349 codes on these cars. I am getting all four of those codes at once and so far I've replaced the alternator and both cam sensors. Codes are still present and I stopped there before throwing any more parts at it. Then I found a post from...

What are the do's and don'ts of running E85 in a street car? I am looking to buy a built 3v Mustang set up for corn. The owner says it's been corn fed for a year and a half. I know letting the car sit with corn in the tank is a no-no, and I am reading forum posts elsewhere that say a tank of 93...

Prices include shipping and paypal fees. Deka 60lb injectors with EV6 connectors - $200 BBK 62mm throttle body - $180 Electronics included. Wheel spacer not included. All parts were working when pulled from the car. I'm in the process of de-modding to get into a different car so stay...

I'm thinking about reverting my car back to NA/bolt-on to sell and want a stock pump & hat. Does anyone have one? Mileage isn't a concern since I have 89k on the chassis anyway. But it needs to be functioning.

Are they any vendors that sell 17"-18" wheels for S197s and do not charge a ton, as in less than $250 per wheel? I'm looking for 10th Anniversary SVT wheels in 9.5-10" width to be exact. But it seems the major outlets only offer wheels in 19"-20" for this chassis, and the smaller sizes are only...

I am not sure if this would be a slave cylinder/fluid issue or an internal trans problem. When upshifting into 2nd I have to do a 1-3-2 dance when the trans is warm/hot otherwise I can't get into 2nd. 4th is also difficult but it does not lock me out. It shifts fine when cold but warm shifting...

I noticed there are bots on the forum and I was wondering what they're for?

I know about the driver's side inflator recall but the Ford Owner site brings up a passenger side inflator when I type in my VIN into the safety recalls query. Are there dealers that even have the parts for the PS? I called 5 dealers around me and only 1 has parts for the driver's side, and...

I know the point of balancing a wheel/tire assembly is to reduce vibrations, but I'm wondering if a wheel takes a lot of weight to balance, there's an underlying problem. Today I went to have my used MT ET Radial Pros mounted on brand new Welds, and one of the wheels took 10.75 ounces to...

One of the POs hacked up my driver's side seat track to install a seat track extension and I need the stock track to restore the seating height back to normal. If anyone has one to sell, let me know. I'm in Lawrenceville, GA 30044.

So I have made some changes to the car that require a retune and I figured I would put my larger injectors and fuel pump to use since they've been collecting dust for over a year (piece mealing parts together). They are SD 60lb injectors and GT500 pumps with a 12awg wiring upgrade. While...

Looking for the stock style PCV line with the quick connects on both ends. Let me know what you got.

There's lots of talk on the web on where to mount the bung, but I don't see much in depth on the electrical side of the install. As in, running wires for the gauge and wideband controller for key on power sources and grounds. And then the SCT Firewire for logging AFR/boost values into Livewire...

This is on old video but I found it on Youtube the other night and was impressed/surprised when they said the engines are a pair of 4v 4.6s. More form than function going on but still an impressive feat. https://www.youtube.com/watch?v=UexiOL8I_3Y

It's for my 2007 GT. I need a working, stock TB to replace the BBK I have and aftermarket rear pads with life left in them. If you need to get rid of the whole set instead of just the rear pair, that's fine too.

In need of a stock 2005-06 fuel level sensor with the metal bracket. I am looking to make a GT500 pump hat work on my GT.

As the title says, my last outings at the track have been disappointing. My car is Procharged with the 4.13" pulley and I'm seeing 8psi on the gauge. With a 2.2 60' time I trapped the same speeds as a stock 3v. Didn't matter if ambient temp was 75 degrees or 95 degrees. It dynoed at 429/380 and...

I see a lot of Mustangs at the track and at car meets and wondered if any of them is on this site. It would be fun to get a small group together for the weekly/bi weekly track days & meets. Do you belong to any clubs? If so which one?

I am thinking about getting my stock polished 18s widened instead of buying new wheels. It would be cool to have stock looking wheels in 18x10 in the neighborhood of a 35mm offset. Plus 18" tires would be cheaper to replace than the 20" tires I have now. Does anyone have experience with...

From what I'm seeing on the web it seems 4032 forged pistons would be better than 2618 in just about every way for a street car that is raced occasionally. I am open to suggestions though so feel free to share any anecdotes and/or data to point me in a different direction. Power goal is 620ish...

Selling my stock driveshaft. Body is very rusted but the CV joint is still good. $30 picked up in the Atlanta, GA area or $125 including shipping & Paypal. I can unbolt the joint and send it as two halves to cut down the length to save shipping expenses, but I didn't want to risk messing it up...

Anyone have experience dealing with this company? I was looking to have my P1SC upgraded to a D1 by them but after searching for reviews I'm not so sure anymore. I found a couple of guides online on how I can do it myself so I'm going to give it a try. But I'm wondering if the bad reviews are...