Search results for query: *

Only 50k miles on her but backroad corner carver with 285 front tires have powersteering making noise. Had accidentally nicked the larger hose from the reservoir last year, trying to find the part number to replace the generic repair hose when I replace the pump. Is this the correct part...

WTB watts link, thinking preferably BMR poly, I'm in CT.

Are the door subs for shaker 500 on 05-09 "boxed" in the door? I just polyfil stuffed the Sony sub in my new to me 13 f150 and it made quite the difference, wondering can I do the same for the Mustang

Doh! Meant to put in chat section I have to do some exhaust work and last time I put midpipe on I had one nut that acted weird, have a feeling the threads on stud are buggered. Is just that stud replaceable while on car (I've had baaaad luck in past on that, but was also high mileage rust...

What are you guys running in regards to home automation? Trying decide do I piece together, don't want to spend a ton 1.) WiFi light switches, we do not have streetlights so can be very dark pulling up to house, I'd rather be able to flip the lights on rather than motion sensors or timers...

3 bed, 1.5 bath, Ranch on 1 acre. 1300 sq feet upstairs, addl 600 lower level. Woodburning stove upstairs, fireplace down, kitchen & bath about 3 years old, other than kitchen & bath entire upstairs is real hardwood. 2 car garage :aww: Lot of small updating to do but nothing...

I found I have a leaking Tokico D-spec rear shock, I thought they had lifetime warranty. I can't find anything on their site about it, and general search I am coming up with horror stories. Anyone have any luck/point me in right direction?

Went to start my 06, battery was dead so jumped it. Gas gauge was reading basically empty, and as it warmed it slowly crept up to where it should be (tad over half tank). I also did quick restart and it took few seconds for gauges to light. Anyone else have this happen? Fluke or problem...

I currently run factory upper with fogs and a matching Silver Horse racing honeycomb lower insert. Now that I installed factory HID's, the fog bulb color looks like garbage.. good led bulbs to match are ~$50. Or Do I install shelby black billet grilles upper & lower, deleting the fogs. I...

Updates! Car has not been cleaned since worked on it, so please excuse Underhood: New wiring harness with some mods (for factory HID headlights) Moroso coolant tank Moroso power steering tank Radiator cover extensions (corners above headlights) Exterior: Rear calipers color matched to...

Like title, looking for a 08-09 Ford OEM HID wiring harness

Nope not tech and yes I have been searching, seeing mixed answers. Current Brembo's with goodridge lines and ATE superblue, factory rotors, want to upgrade pads (no rush to upgrade rotors, when times comes it will be 2-piecers). I have not connected the brake ducts, realistically do not need...

I know there are aftermarket companies that make bracket/disc upgrade kits.. but the 8.8 was widely used, has anyone found a Ford vehicle that used larger and retro-fitted?

The Loctite show was postponed last weekend, this sunday 10/2 is the makeup date. Wide variety of cars but have a great mustang contingent. 1001 Trout Brook Xing, rocky hill, ct

My area used to be a ton of factories, and I had the car clean for a show yesterday.. been meaning to try some of these spots. Yes my P&S stinks, but this was more a test of some spots. Full album, basically just bigger and other angles http://rides.webshots.com/album/580399419TfrFft

Before New Parts: GT500 Brembo's (4 piston caliper with 14" discs) Goodridge stainless braided lines all around ATE SuperBlue brake fluid Strano HD adjustable sway bar endlinks Steeda billet sway mounts (installed last year, not worth it's own post) Parts that were already on the car: F&R...

Semi-random list, would be easier (and cheaper shipping) to get from one place. Figured I'd check the vendors here first :thumb: BBK Filter cleaning Oil Russell stainless brake line kit for F&R 2 liters ATE Super blue brake fluid G2 brake paint (black)

I picked up a set of Brembo's, plan to install, paint rear brakes, flush the fluid... started thinking do all that, what about the lines? Are GT & GT500 lines interchangeable? Are they the same, or are the GT500's somehow upgraded? Stainless braided, the Russell's appear substantially cheaper...

I can sign in with Firefox, but when I try to reply to a thread I keep getting the message is too short. Tried IE (on now) and working ok, ideas? Thanks, Joe

I need to temporarily reflash my car to the factory tune, how do I do this? Probably simple but I do not want to make a mistake and delete the custom tune in the tuner. :helpme:

2010 Roush wheels, 20x9.5" with 275/35/20 Cooper Zeon RS3's. Spray tinted tails with dark outlines of the lights, and I swapped out the front turn signals. Plus the CS fasica's front & rear (still need to tuck the tail pipes in a bit more) My point & shoot was struggling with the reflection...

I saw someone selling "Ford Racing aluminum driveshaft from my 2006 Mustang GT" but I am not having luck finding any new ones on the market... wondering if I am just missing them, or if they were discontinued or if the seller is confused as the manufacturer of the part they have?

I am keeping an eye out for some Brembo take-off's, seen a couple sets without rotors. Is there anything out there better than factory rotors, that do not cost a fortune? What about pads, high performance street use (have to be able to deal with cold stops).

Has anyone found switchback style bulbs that are amber and WHITE? The ones I've seen on this site are really blue looking which is not my style.