Search results for query: *

  • Users: JeremyH
  • Content: Threads
  • Order by date
  1. JeremyH

    OEM 05-10 Fuel Hat Assembly

    I buy oem fuel hats for $50. If you have one laying around you don't need let me know, thanks.
  2. JeremyH

    DIY Stut Tower Brace

    None of the braces out there cleared my manifold so decided to build my own strut tower brace. This concept will be the same for any setup just need to make sure it clears your hood and manifold setup. Materials I used was a 4ft piece of 3" x 1" rolled steel rectangle tube and a 6" x 6" 1/8"...
  3. JeremyH

    Search Function Screwed ???

    What the hell happened? It was already pretty bad. But as of past few weeks it barely works. Wont find threads or posts that I know exist. I can search everything for a simple word and I get like 2 returns. More than one word and often no results at all or stuff unrelated. Tried playing with...
  4. JeremyH

    Ford boss 302 stb black 05-14

    Off my car, still in excellent condition, boss 302 strut tower brace. Powder coated wrinkle black.(matches Ford racing black valve covers). Fits 05-14 mustangs. $150 shipped.
  5. JeremyH

    05-09 Alternator

    Cleaning out the garage, forgot I had it. During install I noticed there was a missing part of the housing broken off but I installed it and works good. They sent me a new one so swapped it out thinking I had to send this one back but I did not. Picture shows the missing fin but other than that...
  6. JeremyH

    Coyote front 02 extension for oe widebands 24"

    I have 4. $25 shipped each. 2ft long, plug and play for coyote factory 6 pin front 02 widebands.
  7. JeremyH

    VMP Slot maf extension harness 36"

    Got 3 for sale. $40 shipped each. Plug and play, 3ft long. http://www.vmpperformance.com/2005-MAF-Extension-Harness-36-p/05mafext36.htm
  8. JeremyH

    2015 Coyote take-off intake manifold

    Complete intake off a 2015, revised design with the charge motion valves integrated, does not include rails. $25 plus shipping.
  9. JeremyH

    11-17 Coyote fuel rails, 2 sets, black, bronze

    $10 each plus shipping.
  10. JeremyH

    GT500 oem fuel rails

    GT500 oem fuel rails SOLD Used GT500 fuel rails with oem crossover still installed. Great for someone piecing together their DOB supercharger kit or upgrading from stock GT rails. $75 shipped obo.
  11. JeremyH

    Ford/Bosch EV6 60lb injectors

    Like the title says, these are EV6 60mm GT height 60lb injectors with uscar connectors. These are a used set of 8 I put together and they have been fully cleaned and flowed to within 2% of each other. These injectors can do 700hp on gas and 600hp on e85 depending on setup and base pressure...
  12. JeremyH

    Custom GT500 fuel system for 05-09 GT

    For sale, take out 2010 GT500 dual fuel pump hat, hat had 15k miles on it when it was pulled from the car. I swapped out the level sender to a 05-09 level sender and modified the hat to be plug and play with the stock fuel hat connector and cleaned the pre filter, hat is in excellent condition...
  13. JeremyH

    KB 40amp bap

    Like new kb 40amp Bap with upgraded 10awg wiring and relay to feed it off the battery. $175 shipped.
  14. JeremyH

    2010 GT Fuel system 550hp

    This kit will work in 05-10 but has the level sender for 2010 only. It is a "walbro 400" s197 fuel hat and my fuel system wire upgrade kit. The pump flows around 340-350lph and the hat is a direct drop in. This kit with the upgraded wiring will support 500-550hp depending on the setup. All new...
  15. JeremyH

    Ford/Bosch Whipple/Roush EV14 38lb injectors and spacers

    Like the title says. These are 38lb injectors found in the whipple and roush supercharger kits. They are EV14 with uscar connectors. New viton O-ring lowers and just cleaned and flowed to within 2%. They can be run as is for shorter blower height applications or with the billet aluminum spacers...
  16. JeremyH

    Ford/Bosch GT500 Ev14 47lb injectors and spacers

    Like the title says. These are 47lb oem GT500 take offs. They are EV14 with uscar connectors. All new viton O-rings and just cleaned and flowed to within 1-2%. They can be run as is for shorter blower height applications or with the billet aluminum spacers to fit all stock GT height...
  17. JeremyH

    Viton fuel injector O-rings

    Bosch viton fuel injector o-rings to replace your old worn, brittle or torn stock o-rings. These fit all modern ford size injectors. Also always use a petroleum based lubricant whenever installing injectors on a rail or manifold to prevent damaging the rings. These are alcohol/methanol/ethanol...
  18. JeremyH

    05-09 Upgraded fuel hat 600hp

    This setup will support around 600hp as it sits and 700hp with a bap. 05-09 GT hat modified to fit Walbro dcss 405lph pump and fuel system wire upgrade kit which runs 10 gauge wire with relay to the fpdm to support the bigger pump. The fuel hat is completely assembled and a direct swap drop in...
  19. JeremyH

    KB 40 amp bap and wire upgrade

    KB 40 amp bap and wire upgrade SOLD! Like the title says, hobbs wires and controller wires are shorted, setup to run full on to feed the fpdm, no controller. Comes with 10 gauge power wire and relay upgrade to feed the bap right from the battery. $175 shipped.
  20. JeremyH

    05-09 Upgraded fuel hat 550hp

    This setup will support around 550hp as it sits and 650hp with a bap. 05-09 GT hat modified with a Deatschwerks 300m 340lph pump and fuel system wire upgrade kit which runs 10 gauge wire with relay to the fpdm to support the bigger pump. The DW300M is fully e85 compatible and pump is designed to...
  21. JeremyH

    05-09 GT fuel hat with GT500 fuel pumps

    For sale, 05-09 GT fuel hat with two used GT500 fuel pumps installed. Has a 05-09 level sender and is upgraded with submersible fuel hose, Y fitting and stainless steel fuel injection hose clamps. Includes a fuel system wire upgrade kit to support the pumps. This setup will support around...
  22. JeremyH

    05-09 Upgraded fuel hat 600hp

    This setup will support around 600hp as it sits and 700hp with a bap. 05-09 GT hat modified to fit Walbro dcss 405 pump and fuel system wire upgrade kit which runs 10 gauge wire with relay to the fpdm to support the bigger pump. The fuel hat is completely assembled and a direct swap drop in...
  23. JeremyH

    TR6060 / GT500 shifter linkage

    Shifter linkage with shifter bolt off my 6060. $50 shipped.
  24. JeremyH

    05-14 Fuel System/Bap install wire upgrade kit

    This wire upgrade has larger 8awg power wires idea for a coyote bap install or dual fuel pump kit on a 3v. $45 shipped.
  25. JeremyH

    Upgraded Gt500 fuel hat, 850hp, e85

    Upgraded Gt500 fuel hat, 850hp, e85 SOLD! This upgraded GT500 dual fuel pump hat will support around 850rwhp depending on the setup, without a bap! It's a direct replacement for your oem FRPP/GT500 dual fuel pump hat. This GT500 hat is modified by me with two new AEM 50-1200 (ethanol...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top