Search results for query: *

  • Users: hamish
  • Content: Threads
  • Order by date
  1. hamish

    Fuel Injector Extenders

    ISO some extenders for ID1000's
  2. hamish

    Intercooler Pump Locations?

    I have been trying to figure out the best way to mount this EMP pump in the engine bay. I am toying with the idea of running the outlet from the intercooler with a small 3/4" tee fitting bypass to the tiny saleen expansion tank. My main hoses are 1.25" This main hose from the IC outlet will...
  3. hamish

    2 post or 4 post lift experiences/advice

    Anyone have experience using a 2 or 4 post lift in their life. I have the opportunity to add either one to my garage. Mechanics please chime in. What do you have and why it's the best choice. My garage height is 13' 6" Width is only 13'8" I would prefer not to modify the structure...
  4. hamish

    ISO Intercooler pumps

    Looking to try out a few things would like to know what is out there. Maybe someone has their old pump laying around after an upgrade. Let me know what you have.
  5. hamish

    S197 Heat Exchangers

    What do you have for Heat Exchangers on the S197? I've got stupid AITs at the speed I am attempting to spin my blower.
  6. hamish

    Can someone take a measurement for me?

    I'm looking at a new house and I can't get to my car. I need to know the distance from the body to the tip of the door when it's open. I need to make sure the garage is wide enough for me to work on it. Any help would be appreciated. The garage is 13.5' wide
  7. hamish

    AEM datalog problem?

    I have a 6 pin to 9 pin Firewire I cut the 9 pin end off I attached the corresponding AEM white wire to analog input 1 (4) on the firewire. Plugged the firewire into the SCT, went to shit! Sent it to SCT. I have received it back. Called them up- told me to wire it the same. As soon as I plug...
  8. hamish

    Pins/wires to check for P0690?

    I have had a recurring issue with the P0690 code. I have a procedure from a ford manual, but no pin numbers are listed. Searching the interwebs I have found the procedure for the 5L with pin numbers but I have yet to find it for a 2006. Can anyone help me find which pins/wires to check?
  9. hamish

    Brown Boot Coils or where to get the boots?

    I am in search of some brown rubber boots for my coils or worst case a set of brown booted coils.
  10. hamish

    What is the Torque on TTY Head Bolts?

    Is this measurable? I got preoccupied yesterday as I was Torquing the Head bolts and I have a strange feeling I may have missed the final 90* turn on one of the bolts. I know....I should have marked them. But is there any way to check? If I knew torque on the first 90* then it would be...
  11. hamish

    Black RTV Placement?

    I am in the middle of swapping heads with the engine in the car. The front cover is off, the heads are off. And I am replacing the oil pan with a Ford high capacity one. According to the Ford Service manual, when replacing the oil pan, place the RTV on the bottom of the front engine...
  12. hamish

    Cylinder hone finish for Saleen 3.554 Pistons?

    I have a local builder that is inquiring what finish I want on my bores. I was planning on using the old Saleen pistons @ 3.554" But I don't know what rings came with those. Anyone able to help me figure this out? Basically he has told me either a 625 or 820 finish.
  13. hamish

    NEED 7 PEOPLE for L&M twin 62mm TB Group Buy $390 each

    I finally got in touch with the builder of these things. If I can get 7 people that want 1 it will be $390 each. Contact me if you want to be in.
  14. hamish

    L&M Twin 62 mm throttle bodies possible group buy

    I have to have one built, but the man doing the job might be willing to lower the price if I can get a few more people interested. If you are, let me know.
  15. hamish

    62mm twin FRPP or L&M Throttle body or Kenne Bell Monoblade for 3v

    I am looking at getting a larger throttle body, what have you got?
  16. hamish

    Special tool for installing Harmonic balancer?

    I need to pull the balancer to remove the front cover. There is a ford pn for an installation tool. Do I need this, or am I o.k. with a puller installer kit from OTC or similar?
  17. hamish

    Bit of a Budget build, advice?

    I have my stock block and rotating assembly with I'd say just shy of 25K miles. I recently purchased some manley H beams from another forum member. Intended to do a semi serious bottom end. But I have been pondering the thought of reusing the stock crank and pistons and rings and just...
  18. hamish

    CP (Saleen) pistons 3.554" bore

    Anybody have a set of these? Are you willing to part with them?
  19. hamish

    Injector Dynamics Fuel Injectors

    What do ya got? I would love some 850's But will look at others. Vendors welcome. I need a good deal.
  20. hamish

    Aftermarket Valves?

    Over time it's been noted that having an Inconel exhaust valve is ideal. But what are the shortcomings of Stainless Steel if any? I am in a postition to upgrade or oversize the valves in a set of ported heads. And I am wondering what the pros and cons are of the various valve materials and...
  21. hamish

    Thermostat housing for saleen supercharger 05-06 0r 07+ crossover kit

    I need one of these. Maybe someone did an upgrade to an 07+ crossover and has one laying around. Or someone has a lead on an 07+ crossover kit?
  22. hamish

    WTT FRPP CBJ Twin 65mm TB for Whipple Mono Blade

    As the title says. I need a Whipple Mono blade pn MGT1750 and am willing to trade for a frpp twin 65mm.
  23. hamish

    Stock Valve Spring Specs?

    Anyone ever check the stockers? Or know what pressures they are?
  24. hamish

    Saleen 6.5 Supercharger Kit with Supershaker parts

    Sold I have one being ported as we speak so I am selling this as a package. Low miles about 15000 miles. Not pictured is the 6.5 lid, it is at PSE I pulled the snout off to drain the oil and it had 5oz instead of the 8oz. The oil was clean and tan color. I discussed this with Ed from PSE...
  25. hamish

    63.5mm,65mm or up Throttle body

    I need a larger throttle body, anyone have one to get rid of?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top