Search results for query: *

I am looking to trade my like new Corbeau black leather seats with seat tracks for factory mustang leather Recarros.

I'm looking for some advice on a fuel pump. The car is an 07 with a 2012 Coyote motor, bolt-ons. Anyway, I modified the sender for a fuel return, installed a 255 lph Walbro pump (GS342 I believe), the fuel pump driver module has been bypassed so the pump runs at 100%. It has run for about 3...

I want to buy a pair of Corbeau leather seats for my 2007 and would really like to sit in the CR1, A4 and LG1 before I dish out all that money. I'm 6'2" and 190, was told by Corbeau that the CR1 and A4s seem to fit taller guys better. Anyone out there have these seats so I can see how they fit ?

The car is a bit of a Frankenstein: 2007 Mustang GT, 2012 F150 5.0 Coyote motor, 2011 Mustang pcm and a Coyote crate motor tune. Car runs great, I get a ck fuel cap message and a P0460 (fuel level sensor circ). I never get an evap code. Is it possible to get a tune so the pcm doesn't look at the...

I love my BMR k-member but hate the vibrations I get with the poly mounts, I may have a solution. I purchased a universal, rubber, biscuit-style motor mounts, of course the bolt was not long enough to fit through the aluminum motor mount adaptors, so I fabbed up some longer bolts and an inner...

Motor, PCM and harness is from a 2012 F150. I plan on using the car's original 5spd trans for now. Going to try and finish the swap quickly as the car is a DD.

I'm looking for 1 injector, BR3Z9F593A.Fits 2011-14 5.0.

Now that the B53 is available, I've given serious consideration to the upgrade. I want a stout bottom end that will handle some boost, only problem I see could be the compression ratio, got off the phone with FRPP tech and it looks like the Mahle piston has a 10cc dish. If I use a 3V head, that...

My 2007 Saleen was involved in an accident in my driveway. At 5:00 am almost 2 months ago, some drug infested, lunatic woman was travelling down our street, side swiped the neighbor's Saturn (that was parked in the St.), paniced and insted of hitting the brakes, she hit the gas (full throttle)...

Looking for the 2007-2009 gauge pod with or without gauges.

I was swapping out my heads on a 3V motor and was really struggling with the headers, I got all the bolts out of the driver's side (after what seemed like 2 hrs), unbolted the the head and moved on to the passenger side. After struggling with the lower header bolts to no avail, I decided to try...

I purchased some OEM headbolts but I noticed my OEM bolts say SPS and my replacements have some symbol. Is this correct or is somebody trying to sell these bolts as OEM tty head bolts ?

I'm trying to put together a forged shortblock for a twin turbo setup. I will be useing the Boss cast iron block,Eagle stroker forged crank, Eagle H beam rods, TSS billet oil pump gears and ARP hardware. Not sure about which piston or rings yet. Any input about piston, rings is appreciated. Also...

Would prefer it with keys. Car is a stick.

If I replace the PCM, is my SCT tuner able to program the new PCM with one of my cutom tunes or do I have to have it programmed somewhere first ?

I'm about a week away from putting on a set of ported cyl heads, frpp intake, gt500 tb and injectors and all of a sudden the car is intermittantly missfiring and setting a P0307 (misfire #7 cyl). No big deal, I've got new motocraft spark plugs, so I installed one new motocraft spark plug and...

I got my 3V heads back from the machine shop and I asked them if they clearanced all valves correctly and they informed me they were all in spec. I found the spec to be .018-.031 in the manual. My question is, Can I check this measurement by compressing the lash adjuster with my finger (new lash...

Looking for Comp Ti retainers 702-24 for the 4.6 3V motor.

I'm going to have a pair of 18"bullet rims widened from 8.5" to 10"and going with a 285/40R18 tire. Since they can only add to the inner part of the rim (I believe this will increase the offset).Are there any rubbing issues or is a spacer required ?

Has anyone tried to run a 4V motor (Coyote or other) with the 3V computer and harness ? With the tuner's ability to turn off IMRC, rear O2s, VVT, I'm starting to wonder if swapping to a 4V motor is possible. Inputs like MAF, O2s, ECT shouldn't be a problem. I'm not sure if the TBis adaptable or...

Looking into building a 323 Big Bore stroker with 11.4 to 1 compression, Stage 3 heads, 127500 cams, FRPP intake, GT500 TB... or going with the Coyote swap, doing the bolt-ons, exhaust, CAI, tune, Boss intake.It is also possible I might go with heads and cams for the Coyote. Which has the...

SOLD !Up for sale are my 2 Weld RT rims, black anodized 15x10 7.5 backspacing worked perfect on my 07. Tires are Mickey Thompson ET Streets with literaly three 1/4 mile passes before I bent a driveshaft. These wheels hooked perfectly at the strip at 4000, 4500 and 5000 rpm launches. To buy this...

I want to start a motor build (N/A) and at the moment I'm not sure the best route. The intended use is a street/strip car. I was thinking of going crate 5.0, harness, PCM and alt. kit OR an aluminum big bore motor around 323 ci. I've already got a set of ported 3V heads, FRPP intake,TB and a set...

My FRPP intake finally came in and I want to put a GT500 tb on it before I put a tune on it . Will the GT500 tb bolt on without a spacer or is the spacer required or a modification necessary ? Also, Who has the best price on the GT500 tb ?

I've put up with this annoying noise/vibration long enough. The parking brake vibrates an annoying noise between 1500-2000 rpms at times. If I rest my hand on the handle it dampens the noise and it goes away. It's been getting worse. I did the little trick about the clamps around exhaust hanger...