Search results for query: *

Replacing the OEM radiator cover and CDC extensions with a TruFiber radiator cover. With the Vortech SC the OEM power steering reservoir is relocated to the passenger side of the radiator. I notched my CDC extension to suit the reservoir and would like to do the same thing to the carbon fiber...

Looking for 05-09 Passenger Air Bag Cover (cover only), what do you have? Thanks.

Pulled my Ford Racing intake to relocate the IAT sensor from the MAF location to an intake runner. Frankly I was very shocked at the amount of oil that had accumulated in the intake. I previously had a JLT catch can on the driver’s side until the forged motor and Ford Racing Intake went into the...

Tube from OCS Bladder to Sensor on 15+ Recaro seats. What are these little tubing clamps called, where can I get them and what tool do I need to crimp them?

Looking for a two connectors from 2007-2013 Mustang Seat Belt Buckle Assemblies. The part number for the buckle assembly is 7R3Z-6361203-AA, but I only need the male two wire connectors with 3 or 4” of wire.

2008 Driver seat harness for power and heated seats. What have you got? Passenger harness pictured for reference.

Anticipating I will need an OBD-II Reader that is capable of reading enhanced Body Codes when working on my 15+ Recaro install in my 08. What OBD-II code readers are you using that you know work with the body codes related to seats? Thanks!

Looking like the Corbeau submarine strap is going to be too short for rear mounting with UPR mounts. Are there 2" belt extensions available?

What are full figure guys (40+ waists) using for aftermarket reclining seats? Anyone have experience with Corbeau VX2000's, do they fit in a S197?

WTB Engine wiring harness for 2008 4.6L with automatic transmission. Any out there?

April 27 2015 I paid $4.07 CDN for this pinion nut and crush sleeve. Priced it 15 months later and the CDN list price is now $25.28! What is going on?

What would be a fair selling price be for a complete (minus starter and alternator) 2008 3V be with 22,000 kilometers on it?

May not be news to many but I just found out today there is a Coyote Power Module for 6R80 automatic transmissions. http://fordperformanceracingparts.com/pri/

Have been looking at RTR wheels, but I have 3" wheel studs on my car and would need open ended lug nuts. Are they available in 1/2-20 for RTR wheels? I am sure the Ford Racing 1/2-20's will not fit.

Tank is full, gauge reads empty with idiot light on. Occasionally when key first turned on gauge reads 1/2 full for a few seconds and then goes to empty with idiot light on. Any ideas on what I should look into?

08 with original wheels and OEM TPMS - worked fine Added GT500 wheels with OEM Band Style TPMS - works fine Added Race Stars multi-fit with ORO-TEK (American Muscle) Valve Stem TPMS in March 2012 - was never ever able to get them to train Added Race Star direct fit with (CJ Pony Parts) Valve...

Following the Strange instructions I substitute the provided hardened flat washers for the anti-moan bracket but the OEM caliper bolts are too long and would contact the rotor if tightened. Are there shorter OEM caliper bolts? Those who have installed Strange C-Clip Eliminators, what did...

Getting down to the short strokes on swamping my differential for the shortened one I have been building. When I disconnect the air lines from the bags should I make a new clean cut on the air lines, or is this not necessary? Not a problem if you recommend a clean cut, just a cramped space...

Steve trust all is going well! Just installed Ford Racing X-Brace and Rear Seat Delete kit, part number M-6346612-B. Looks great and fits perfectly. However, in thinking ahead I believe the four fasteners for the Center Luggage Cover are going to be the weak link over time. I tried...

Need to install a carrier bearing case/sleeve without the Ford tool. To install the OEM bushing case into the housing I assembled a tool from some threaded rod, a few large flat washers, a ½” ID bearing. With this I was able to pull the case until it was flush with the passenger side, but I...

This illustrates OEM (right) and ARP (left) part number 250-3003 Ring Gear bolts. The install instructions from Ford Racing and those provided by ARP are different. Ford Instructions – apply 1/8 bead of Loctite 638 (red) around the rear face of the ring gear and tighten to 97-102...

The differential that I am shortening is part number DR3Z-4010-A, I have the Ford Racing install kit part number M-4210-B1 however the inner pinion bearing race that is already in the housing is significantly deeper and larger in diameter than the race in the M-4210-B1 kit. What is the part...

Jeremy, you have been holding out on us. Just got off the new site and it looks fantastic! When did you guys make the upgrade? http://www.airliftperformance.com/

Hoping you can help me out. Had hip surgery late in January and I am having difficulty determining the correct size of the 4 nuts that hold the sway bar on. It is still a challenge for me to get up and down from under the car to the tool box and I believe I have tried the following without...

I am going for the record for the longest Air Lift Digital Combo Kit install as I still have a month to go following hip replacement surgery before I am allowed to get down and up from the garage floor. In the meantime I am going to tackle the jobs I can do stooping or from my rolling garage...