Search results for query: *

I'm trying to determine if I have solved all my electrical woes or not. My alternator issue is now solved (bad clutch pulley in a dedicated thread). Now onto this next gremlin... I've always had the car battery die after only 3-4 days if not kept on a battery tendere or charger. I have...

SOLD SOLD SOLD For sale (Edited 3/26/19 to add more pictures and a price drop): Single AeroForce Interceptor CNF501 - works on 2005-2010. (2011 and newer are different software). Green display Both white and black faces included Black bezel ring with silver lip (You can order other bezels...

As title states, which water pump should I buy? I was just going to go OEM (M otorcraft PW496 ($79) but I see Edelbrock has their Victor series ($189) which has a bigger bearing and CNC-machined internal housing - and they claim it flows more. American Muscle has an OPR branded one for $50...

I wanted to see if anyone has recommendations for a good machine shop on the south side of Atlanta? I have a good one on the North side where I used to live (Goza Auto parts and machine shop in Acworth, GA) but I was wondering if anyone knows of one in the Fayetteville, GA area that is good...

Gents, I drove my Stang to pick up my buddy for dinner, then when we left the restaurant and I was headed to drop him off the car started running rough...like it was running on 7 cylinders...then it smoothed out...then it got rough again, then finally died and would not re-start. It smelled...

I want to switch to The Corn. I used SEARCH, but need more info. 2006 GT with TVS blower. What I have: GT500 fuel pumps Kenne Bell Dual BAP ID 1000 injectors on the way What do I need to do mechanically? Any hose swaps? Are the GT500 pumps fine with E85? Obviously I'll get a...

I have a GEN 1 Roush TVS R2300 that came with the pressed-on pulley (3"). I converted it to a Carmen's quick-change 6-rib set-up, but Carmen does not make pulleys anymore and I am switching to 8 rib when I do my build. Where can I buy 8 rib pulleys for my TVS? I understand there may be...

Looking for suggestions on drag tires for the RaceStar 15x10 (7.25" backspace, 44MM offset). I have a Whiteline Watts link, so everything is centered-up nicely. I have also deleted the assembly line metal holding / bump stop brackets (and added bump-stop relocation brackets) and I run Steeda...

Question: My stock (9.8:1 CR) shortblock is fed 9 PSI by my TVS. If I put in my 298 stroker with 11.5:1 compression and make no other changes to the build (no pulley changes), what will that do to my boost pressure? I will actually be adding: Comp 1273509 cams w/ Livernois or Comp...

The 2013 GT500 oil pan with pickup and windage tray is no longer available for my 298 stroker 3V build. What's a recommended plan B?

I have the following symptoms: Idle voltage 11.5-12.5 fluctuating. Running voltage @2500 RPM and up: 12.5-13.5 fluctuating. I am assuming my alternator is going out. Fortunately, I have two spares...so I'll probably just swap it out, but is there anything else to check first? Any...

Guys...Let's build up some data to help each other out. Tuners have all of this stuff wired...I want to have ball-park figures available. There are lots of threads on this topic, but most seem to turn into too much speculation. Let's keep the nonsense out of this thread and simply post...

Well...The S197 classifieds got the best of me, and I am taking the plunge. I've built three engines before - two Kawasaki ZRX motorcycle engines and one push-rod V8 (Ford 335 series 400 - .030 over, full hydraulic roller-rocker setup) - but this is my first modular. I would like advice on...

Pioneer Elite AVH-P3400BH double-din head unit. Was used in my wife's MommyVan (Honda Odyssey for ~6 months)...pulled it when I sold the van to buy her a new one. New one has fully integrated video / nav so I don't need this one anymore. Great condition. I have it all boxed up and...

SOLD to WHT67. I am upgrading to a Steeda Triple-Pass heat exchanger, so this Afco 80280NDP double-pass unit needs to go to a new home. New retail on these is $550, market price new is $439, I'll let this one go for $325.00 SHIPPED in the continental USA...if you gift the PayPal. If you...

SOLD Full disclosure: I bought this from AM...installed it, but didn't like the way the edges fit. I'm a perfectionist. I called AM, they sent me another one, but didn't want this one back. Second one fit exactly the same. I had to either send it back for a refund or see if I could make it fit...

WTB a rubber shift boot from a 2005-2009 - one with no cracks / tears that has not yet been cut. Not the leather one you see from the interior; the one under that that mates to the cut-out in the body: Shoot me a shipped price to 30101. Thanks, Shane

I picked up a Steeda Tri-Ax for the T56 Magnum XL. Install was a pain only because the bolts are very hard to get to. A combo of various 1/4 and 3/8 drive ratchets and extensions as well as a 3/8 drive 13MM swivel socket and a 13MM open-end wrench got the job done. If you are in the...

I did a lot of searching and there are not a lot of threads on methanol injection. I found one (Post #669) that was VERY helpful here because it shows how LostSoul installed his pump (I had no room on pass side since my Meziere intercooler pump is there)...

I have an Innovate Motorsports LC1 with G3 gauge wideband setup. It is garbage! I've had it for two years or so...it was actually replaced by them since my first one was such crap. The first one lost calibration constantly. This one (the replacement) has been in the 'Stang for...

Freshly re-surfaced today by my machinist. Steve Poe originally owned it IIRC; he says it is an older Spec unit. Not sure on that , but it is a nice piece. Could be a Competition Clutch, ACT or Clutch Masters...either way, it is really nice. $190 shipped.<--New price The other thread before I...

-=SOLD=- FS: McLeod RST Twin-Disc Clutch (10 spline) $640.00 shipped in the continental USA. I'll take PayPal. Add $20 to that price if you don't want to gift the money. Here is a generic photo of an RXT; the RST looks just like it except the fiber material is different...

I've been running a TR3650 stock 2006 GT 5 speed transmission with a Roush short shifter. I barbecued my stock GT clutch when I added the TVS blower. I "upgraded" to a McLeod RST clutch mated with a stock GT flywheel - set up by the McLeod factory. That above combination cost me $900 to...

Used SEARCH but failed, so here is my query: Does anyone know if ARP 254-2801 flywheel bolts (listed as being for 8 bolt setup for 1996-2004 manual 4.6L V8 Mustangs, including the GT, Bullitt, Mach 1 and SVT Cobra models) will work on my 6 bolt McLeod lightened steel flywheel with a 6 bolt...

SOLD to Len20Hun FS: BMR driveshaft safety loop Model DSL010. Street price $110 new. I'll take $65 shipped to the CONUSA. Please note that I cut off the corners and put grey primer on them (so that the mount corners would clear my Mac ProChamber. The cut corners do not adversely affect...