Search results for query: *

I`m looking for the Ford Racing 47lbs injectors, Part # M-9593-LU47 Offering 180$ shipped, I can pay via Paypal.

My newly built engine (2013 GT500 oil pump, motorcraft gaskets and oil filter) startet to leak oil after the first let`s say 100 miles. Just a few drops after parking it while cooling down but with time the wind while driving spreads it all over the underside and it starts to smell typically...

I`m looking for a set of black valve covers. Please offer me anything from old Ford Racing parts (the ones without the etched Logo) and DIY powdercoated or professionally painted ones. Greets and thanks

Hi everybody I need someone to help me out. If you have a stock 4.6 3v piston nearby, please measure out the dish for me and post the measurements or take a picture of a quick drawing. Judging from photos, the dish looks to be flat in the center with rounded edges flowing into the piston top...

I`m looking for a forged 4.6 crankshaft, doesn`t matter if out of a cobra or something from Eagle. Best if it`d not need too much work besides a polish, because I allready purchased stock diameter bearings from King. I have a freight forwarder in the US and paypal ready. Offers via PM please...

I`m looking for a good set of h-beams, and I`m offering 420$ shipped incl. paypal fees. Shipping to Switzerland ist typically between 50 and 75$ with USPS. Greets

Hi everybody I`m currently having a 3V block at the machining shop and my funds ready to buy internals. My goal is 550rwhp and matching torque with my Saleen VI supercharger and a max of 15psi, better if lower. The bores are allready too worn for the famous Saleen/CP piston solution, so I have...

I`m looking for stock stroke cranks without the need to regrind, cast or forged. Further I need H-Beams of course and pistons, preferably 4032 like Saleen/CP or Mahle and so on, not lower than 9:1 on compression. Any other small parts like bolts, bearings etc are welcome too. I have a...

Hi everyone So I found this listing of a Longblock, seller says he pulled it from a `09 Mustang with 35k Miles. The heads shows a "04" Sticker, the coils and injectors are not looking OEM. There are two rod bearings damaged, the engine was running when pulled with slight noise. Want to get...

After I had my car tuned by a reputable german specialist back in April, the car ran fine with a 3.6 Pulley. Torque was below what I expected, hp was nice. On my way home I realised that the tach was off, the cruise control was acting strange. No big deal, I adjusted the tach myself. This tuner...

Hi My `07 GT is supercharged by Saleen and putting down 408rwhp/381rwtq on 7PSI (3.6" Pulley) on a Dynojet. The car certainly feels quick, but there is some doubt I have about the way my tuner adjusted the whole thing. First, the AFR does not cross the 13.0 marker until 3500rpm, then it goes...

I`m looking to sell some stuff I don`t need. I`m located in Switzerland, all the prices in € are shipped prices into the EU ( troops or mailboxes ) all the prices in $ are shipped to the US obo. 1.) New Prothane Bullet engine mounts, 1/2" lower 120€ or 165$ 2.) slightly used, like new...

I have a used VI Supercharger kit, the following parts are missing: 06-2003-C09861 Molded hose, S/C H.E to Intercooler 06-1704-B12563 ACT Connector Harness 00-1706-C15323 Alternator Standoff brass 06-1604-C09936 Alternator Pulley 06-2003-C14380 Lower heater hose If someone knows if one...

Has anyone installed a 2005 Saleen Supercharger Kit onto a 2007-2008 car? As I see it, I need ; " Water Tube 05 Mustang " Part # 06-2003-C09925 " 3" of 3/4" Heater Hose" Part # 069-950 "3/4" Hose Clamp" Part # 00-2003-C10068 In the overview, according to the latest revision in 2010, the...

Hi folks I know a guy who wants to donate his used Saleen Supercharger to me, because he wrecked his 2005 engine with a 10PSI pulley and a lean mail tune ( plus he owns a company and his `13 GT500 is allready ordered ) and then switched to a JDM 302 engine with an Edelbrock E-Force. The...

I`d like to sell this to someone located near, for example US soldiers in Germany. Giving them away, they are used and I will sell my car in a few weeks anyway. Break down: PAC-1233 springs $305 Comp 127300 VSR cams $350 Ford OEM camshaft bolts $32.98 Selling for 600$ OBO shipping...

My GT is soon sold, so I`ll have some cash to spend from this fall to next spring. I`m experienced with importing cars from the USA, so shipping is no problem. Sadly, I just know eBayMotors.com to look for GT500s, so if anyone knows one in nice condition, I`d be glad to get a PM about it. I...

I searched all over google and different forums, but no results. Found these 18x9 and 18x10 ReplicaWheels deep dish Cobra R in gunmetal for the 05+ on ebay. I think they would look great on my black `07 GT, plus they are light! Someone has to have them, or at least knows someone that has...

I got my first brenspeed mail tune yesterday, adjusted for my AFE Stage1 CAI but otherwise stock 07 GT. With my SLP endpipes and even with the stock exhaust, i constantly got a "pop" at ignition and if reving slightly as in this footage : http://www.youtube.com/watch?v=V6ujhfE2UV0 While...

I would like to see some S197`s with the Wheel Replica Deep Dish Cobra R`s http://cgi.ebay.com/ebaymotors/Deep-Dish-Mustang-Cobra-R-Wheels-18x9-10-inch-2005-_W0QQcmdZViewItemQQhashZitem1c1a7d3089QQitemZ120703496329QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Please PM me your offer or links where to get one cheap. Thanks

Is there any performance potential in port matching the OEM heads or is it more clever to buy CNC heads ?

Is there really no machine work necessary with this kit ?? http://cgi.ebay.com/ebaymotors/Ford-4-6-Mustang-GT-Engine-Upgrade-HIGH-COMP-302-Kit-_W0QQcmdZViewItemQQhashZitem53e3ebc5cdQQitemZ360306165197QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I know it looks like a V6 grille, but they don`t fit on the GT`s... What could it be ?