Search results for query: *

As Greg can attest to, I don't have a Mustang anymore (at the moment). However I am looking to do some work on my Volvo (V70 2.5T). Since it's a turbo, I wanted to open the exhaust up a bit with a catted downpipe. I've never had a car inspected in VA before, so what exactly do they look for...

Location: Carrollton, VA Prices: Listed with each part below Corsa Xtreme Axlebacks (PN: 14314): I'm the second owner. These are in great shape. Aggressive sound with no drone at any RPM range! The rear driver's side hanger tip was shortened by 1cm. Does not affect how it hangs on the car...

Location: Carrollton, VA Price: $250 shipped Unmarried/unlocked SCT Xcal3. I sold the Mustang, so I no longer need this tuner.

Location: Carrollton, VA Prices: listed with each part description below (all are OBO) Stock 2006 Mustang GT front rotors. Used for approximately 30,000 miles. No cracks. $20 plus shipping. Stock 2006 Mustang GT shocks and struts. Use for approximately 15,000 miles. No leaks, great if you...

Location: Carrollton, VA JLT Oil Separator price: SOLD FRPP STB price: SOLD FRPP CAI price: SOLD All parts have been on my car for approximately 5000 miles. The JLT oil separator is for 2005-2010 Mustang GTs. Comes with the stock hoses already attached. FRPP strut tower brace does not...

Location: Carrollton, VA Driveshaft price: SOLD Coolant tank price: SOLD Up for sale is my DSS Driveshaft that will fit 2005-10 Mustang GTs. I had this on my car for about 2000 miles. The grease in the pictures is from my gloves...this thing was actually spotless when I took it off the car...

WTB: 07+ Coolant Crossover + supporting parts I not only need the crossover, but the supporting hoses, T-stat, o-ring...everything to do a conversion from a 2006 GT.

Looking for a stock intake manifold from a 2009-2010 Mustang GT. I'd be willing to entertain offers for 2005-08 Mustang GTs as well, but prefer 2009-2010. I need it in excellent shape.:thumb2:

Location: Carrollton, VA Price: $100 shipped These were on my car for less than 200 miles. In great shape, and fit great. These will fit 05-09 Mustang GTs and V6s.

Ok, so here's my situation. I've got a 2006 Mustang GT with 43,000 miles and a manual transmission. I can't quite remember when it started, but I've had a dull vibration from 1500-2000 RPM. Dull vibration = barely noticable unless you are "looking for it". It was most noticable on the highway...

Location: Carrollton, VA Price: STB, SOLD/Magnaflow, SOLD Strut tower brace is from a 2012 Mustang GT. It will fit 05-2014 Mustang GTs; however for 05-10 GTs, you may need motor mounts that will lower the motor. The length of the STB fits the 05-10 but it doesn't quite clear the intake...

Location: Carrollton, VA Price: Long Tubes: $500 plus shipping, X-pipe: $120 shipped. Fits: 05-10 GT I just had these taken off my car. They both have approximately 8000 miles on them. They have the usual patina, but they do not have any rust. Both pieces have a natural finish. The LTs are...

2006 Mustang GT 42,200 miles $14,000 OBO. I have the title in hand. Location: Carrollton, VA I’m the second owner. I bought the car with 13,000 miles on it and it was bone stock. This has been my daily driver, but garaged everyday. It has the interior upgrade package from the factory...

Location: Carrollton, VA Price: $60 shipped. I had these on my car for approximately 10,000 miles. They show a little wear from being on a daily driver, but still function perfectly! These are a lot easier to install and remove compared to the stock pieces! Additional information from the...

FS: Koni Sport Shocks/Struts, UMI PHB Location: Carrollton, VA (23314) Koni Sport struts (shocks are sold). On the car for approximately 9,000 miles. These are adjustable and come with the adjustment "key" seen in the picture. Asking $200 shipped. UMI single adjustable panhard bar...

Location: Carrollton, VA (23314) I need the following stock/OEM parts as I go back to stock: - Mufflers - Throttle body (with electronics and in excellent condition) - Front sway bar end links (in excellent condition, not stripped) - Motor mounts - Also depending on how fast you can get it to...

Location: Carrollton, VA (23314) Intake manifold price: $450 shipped, no trades CAI price: $125 shipped, no trades The intake manifold was on my car for approximately 10,000 miles. I've never had an issues with it and fit was perfect. Not in the picture, but also included is all the hardware...

I'm looking for the line in this picture labeled "VAC-C".

What is the part number for the VAC-C hose? (not VAC-B)

I'm located in Carrollton, VA (23314). I need a stock panhard bar, mufflers, and airbox assembly (airbox, filter, and intake tube) for a 05-09 Mustang GT. Let me know what you've got!

Location: Hampton, VA Price: $550 shipped This is a 3.5" Driveshaft shop driveshaft. 1350 front u-joint with flange to mount up to the transmission. 3.5” 6061-T6 aluminum rated for 3450ft lbs of torque, custom welded on DSS auto feed machines. New version 300M Spline for the CV mount that is...

Location: Hampton, VA Price: Pads ($90 plus shipping), hose fittings ($5 each shipped) BNIB Hawk HP Plus pads. Never used...still in the box. Front only for 05-10 Mustang GT with non-Brembo brakes. BNIB 90 degrees hose ends (-10 AN x 3/8" NPT end)

Location: Hampton, VA Price: Front ($100 plus shipping), Rear ($100 plus shipping) Front bar specs: Front sway bar: 3-position Adjustable, 35mm (1-3/8 inch) Tubular Rear bar specs: 1" tubular, .156" wall, 3-position adjustable Had both of these on my DD for about 8,000 miles. The rear finish...

Location: Hampton, VA Price: $150 plus shipping Never installed powdercoated valve covers. They were powdercoated by a member on this forum. I was going to install these on my 06, but realized I needed a smaller grommet for the VCT sensor on the driver's side. These are the new version...

https://www.nasaproracing.com/event/1657 Who is going? Anyone? This will be my first east coast event!