Search results for query: *

  1. B

    Saleen Series IV specs

    Does anyone know or have access to find out the torque specs for every part on a Saleen Supercharger series VI? My builder wants to take mine apart to clean up but does not want to do so without the proper specs to put everything back together. All the shops he has tried say "ship it down and...
  2. B

    What have you done to your mustang today?

    That is the plan and my builder is assuring me it will work so should know in a week or 2 hopefully. Still the same bracket and such that was in there before with the blower but just a new alternator on it now.
  3. B

    What have you done to your mustang today?

    Still just a 4.6L but got the short block from Coast High Performance, it is there Pro Street Kit, then added stage 3 livernois heads, stage 2 blower grind cams, the long tubes and a bunch of other goodies. Bumped the blower up to 10-12psi from the 7 I was running before so it should be fun...
  4. B

    What have you done to your mustang today?

    Went to visit my toy 2 weeks ago and this is where it was sitting at that point. Went back in last Saturday and she was in much better condition, just waiting for the last gasket for the blower lid.
  5. B

    Remote start recommendations

    I have a compustar in my Mustang and to set it I have to put the car n neutral, pull the park brake on and turn the key off. When I close the door teh car stops running and is armed. My aunt has a 2013 Miata with a Viper Remote start and hers works exactly the same, no different than the...
  6. B

    WTB: Shifter

    http://www.s197forum.com/forum/showthread.php?t=126013&highlight=mgw
  7. B

    What have you done to your mustang today?

    Alberta, Canada. Stopped coming down around 3 this afternoon.I have around 6" in my yard but luckily almost everything on the roads melted as it was coming down so they aren't slippery yet.
  8. B

    What have you done to your mustang today?

    Must be nice to have fall in the air, It has been snowing since friday and no signs of it slowing down. Kind of glad my car is still in the shop now.
  9. B

    Car Cover Help

    Looking like I am going to have to store my car outside for the winter this year, any thoughts on a good fitting car cover that will withstand an extreme winter? it isn't unusual to have temps of -20C(-4F) to -35C(-22F) has been colder but not often and could be lots of snow, hard to say. Not...
  10. B

    What have you done to your mustang today?

    Went to visit mine today, the new rims and tires fit almost perfectly flush with the back wheel wells. Hoping to have the engine put i soon as it is almost time fr it to be parked for the year. Builder is still waiting on a couple parts then to put everything together. Should be interesting...
  11. B

    *Official* BBQ N' Smoker thread

    I bought my Traeger pellet smoker about 5 years ago and have only had to replace the heating rod so far. I use it at least once a week and usually twice on the weekends all the way from simple chicken and steaks to all day smoking turkeys and making jerky. It was $1000 CAD when I got it and I...
  12. B

    First time at track

    Not sure how your track gets prepped but at ours I don't go around the water box and do about a 5-10sec. burnout in second gear at 1/2 throttle or so and on my 255 street tires at 25psi I can launch at 3000rom dumping the clutch and just get a small chirp off the line. I was running 450rwhp and...
  13. B

    What have you done to your mustang today?

    Got my new rims and tires for the rear. 18" deep dish with 295/40/18 Nitto 555 G2. Should give me a bit more grip than the 255's that had very little tread left. Also found out my builder finally got my cams in so he can finish building my engine and get it installed soon. He is still hoping...
  14. B

    Yes, another CAI vs stock airbox question

    I almost forgot about this thread but here are a couple pics of my airaid cai on my saleen blower with no mods to any other parts to make it fit
  15. B

    Fuel Pump Q for Whipple supercharger

    If you want I could sell you a used BAP for a reasonable price. I went to the GT500 pumps as my builder is shooting for 650RWHP. PM me an offer and I will see if my builder would be able to ship cheap or if I would have to do it myself, can't see it being that much to ship across Canada. BAP...
  16. B

    Engine Builder Suggestions

    Coast High Performance is where my shortblock came from. My builder says the engine looks very well built to him. Have yet to get it all installed and running though.
  17. B

    2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

    I have had FRPP 4.10's in my 06 for the last 60K miles and have never had any whine at all out of them. Just had my local ford dealer install them and never had any issues
  18. B

    WTB: Injectors 05-09 GT

    I've got a set of fairly new 39# I would let go for $140 shipped but I don't know how they would work with E85.
  19. B

    Post two pics of your car

  20. B

    What have you done to your house today

    Brought in my last load of dirt for my backyard strawberry bed and had a little mishap. At least i know my 4WD in my trucks works well, almost had to get towed out of my yard lol. Sent from my SGH-I337M using Tapatalk
  21. B

    What have you done to your house today

    Almost finished my strawberry bed in the back yard, just need dirty and 1 half of a brick Sent from my SGH-I337M using Tapatalk
  22. B

    What have you done to your house today

    Just be careful with those screens, my mother has had a screen door similar to that and she went to open it the other day and no screen came out. Guess who gets to try and fix it next time I am out there LOL. Also finished up my front yard, just need to put another layer of mulch on the part I...
  23. B

    ❗️ Win $500 Towards Your Build at AmericanMuscle.com ❗️

    Would pay a good portion of my 18x10 Black bullit deep dish rims and DR's
  24. B

    3 valve heads

    Good luck finding a set of FRPP heads from any place in north america!! They are discontinued and no-one carries stock in them the just build them when ordered. My builder tried for 3 months to find a set and finally gave up and went with Livernois as they were the only ones he could find for...
  25. B

    Old School Stance

    Let me know how those 305 Nitto's fit in the back as I wouldn't mind getting a set but am a bit worried about rubbing with the FRPP lowering springs I have in mine.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top