Search results for query: *

Great upgrade Kyle, been some time since I've seen your thread. No surprise though, you always keep pushing the limits,can't wait to see you post a track run with this new engine setup.

Hey Barry, Attached pics are the Coils and the plugs I like to use. Send me a PM I have a spare set of Good OEM coils I used as backups, you look up what they are worth and give me half. I also have alot of used plugs that are perfect, I will send you 10 of them to get you going free. I use to...

It's been a number of years since I swapped my engine so I'm just recalling some things. I've done quite a bit of messing around back then to make all the changes both physical components and electrical. I always like the simple things, if it's easier to tune, I'd use my SCT Ford Racing...

Centri blower needs the 4:10s, they don't have a lot of umph coming out of the hole unlike a turbo the have less torq down low and build linear power as you get going. I found that running 10-15% overdrive on the crank and a smaller pulley on the blower helps the spool up quicker out of the hole.

I think Dino has this spot on. From my experience with the newer engine in my 06 GT, you probably will get in more trouble trying to put a 09 computer in that car then you want. The newer computer runs at a different processing speed than the 05-06, you will run into pin out problems even if...

Looking for an engine wiring harness for a 2006 Mustang GT. Manual Trans Harness only. Please PM me any used or new you have to offer.

Please consider a 4R70W swap instead of the Super Street Fighter Trans. Many have been down this road including myself. My Super Street fighter didn't last 1 run down the track.

Coming Back

Took the cover off today, sure as shit it's still white.

That doesn't sound right at all, check oil pressure and see if you have any error codes that might have anything to do with Cam positions. If they installed the chains right and timing is correct that little difference in the oil pump may be the case, TSS makes a nice oil pump gear, I've used...

Do you know if your car is staying in closed loop, I know I've been fighting this code after a trans swap and noticed that the car would startup open loop, close for a brief moment and then go back into open loop. My emissions would never set because of the open loop however my car runs fine...

:angry1:Crap, been some time since I posted, move this to chitchat.

Anyone have a part# or place you can purchase an 8rib AC pulley. The 2010 Mustang AC pulley is different than what comes with the 2005-2009 Vortech/Paxton conversion kit. Thank you.

From the air filter to the rear tires, I think I've changed or modified everything. It's built, it's mine, nobody know's her like me. Buying the next greatest gen platform car will just have short term happiness and end up another heart breaking money pit. I'm good.

Hi Scott, It looks like your running it the way Vortech shows in the manual, passenger valve cover going to the intake of the blower. Since you said oil was coming out of the TB, you may want to check your blower and piping after the blower exit. It's possible your getting the oil from the...

At 550rwhp a good aftermarket rotating assembly given to a known 3v builder would be more than enough to have a solid machine. I did 2 yrs on the stock block at 450rwhp. In 2010 I put in a Ford Aluminator, went to 550 then 630 and finally 767rwhp. Engine and internals are still the original to...

Rotate your engine, your loose side should tighten and the other side relax, it can depend where the cam lobes are in relation to the valve spring. The springs can put pressure on the lobes causing it to load the cam in one direction making the chain tighter than the other side which may be...

Good stuff here, love these threads and continue to be amazed each time a new one appears.

Been where your at now, my stock trans with a hardened input shaft and a catch can lasted 10 yrs, spent 4K and purchased a Level 10 pile of shit since it was late in that year and I still wanted to get some runs in, well it lasted less than 6 months. Did the 4R70W swap, save money swap. When...

I really like that Ford Racing Door well light, I got's to have one now. Where did you tap into the power, was it an add a fuse on the interior lights?

Thanks Scott, The P0689 Code doesn't want to leave me yet even after rewiring with the correct prints. I bought an OEM Service Manual and Electrical Print hard copy off Amazon, once I have that I'll start comparing the auto and manual prints to see if we can find something that may be...

https://www.theguardian.com/world/2016/mar/07/millennials-generation-y-guide-to-much-maligned-demographic Kick your friend in the nuts till he pays up.

PM Sent. Thank you again.:beerchug2:

Well I feel relief, and when I get home I'm going to make my wife read this thread so I can prove I'm not senile and in need of a good retirement home that she keeps suggesting.:insane:

Thanks Lito and Billy for clearing this up, so the prints online are mis-marked as 2005 when they are 2007 and up. Not much was making sense trying to wire this up, it would sure be helpful if anyone could post these prints up and add to a sticky as this ones important. Thanks again Billy and Lito.