Fastest Manual Trans ET's???

[pacettr]

I realize most of the quicker cars switch to an auto at some point (if they aren't already), but who has gone fast rowing gears?


I'm contemplating my next round of mods and feel that my car has .60's-.70's in it as it sits. I wouldn't mind making one or two bonzai 9-sec passes before getting kicked off the track, and I won't take the steps to make it 9 sec legal.




So who has a fast manual trans car?

 

[white05gt]

Might want to try this http://s197forum.com/forum/showthread.php?t=5218 lol

 

[US-1]

10.37 - 134

 

[Matt D]

My Tremec has been holding on good, but can it take another 200+ passes next season.... you talking stock trans or stick in general? The 6060 guys are running 9's in the shelbys

 

[pacettr]

Might want to try this http://s197forum.com/forum/showthread.php?t=5218 lol

Just wanted to get a bit more specific and have people chime in.

My Tremec has been holding on good, but can it take another 200+ passes next season.... you talking stock trans or stick in general? The 6060 guys are running 9's in the shelbys

Primarily stock but 6060's are welcome. Just want to give myself something to shoot for.

 

[Matt D]

Few 9.4's out of a couble big powered shelbys. The tremec 3650's would probably be on borrowed time in the low low 10's but only one way to find out

 

[US-1]

Few 9.4's out of a couble big powered shelbys. The tremec 3650's would probably be on borrowed time in the low low 10's but only one way to find out

Two words: Hanlon Motorsports

 

[pacettr]

Few 9.4's out of a couble big powered shelbys. The tremec 3650's would probably be on borrowed time in the low low 10's but only one way to find out

I'll let ya know

 

[dysan]

+1 on Hanlon. They have a new rebuild kit they're finishing up for the 3650 that's supposedly going to handle around 1000hp. It should be available around January.

 

[firestang70]

I spoke to Hanlon as well. My 3650 is holding up well. No issues I have 51k miles. I put a whipple on at 40k miles and added a Spec 3+, AL flywheel,stock TOB,input shaft etc. Best ET has been 11.37 w/o power shifting. With power shifting, -DA day and a better driver I think the car could run a 10.99 lol. Unfortunately I am selling the car. If not Hanlon would be doing a gforce gear setup,26 spline input shaft, on my 3650.

 

[chad05gt]

10.37 - 134

seriously ... that's it?? C'mon SD... I got sum work to do