Gt500 Nitrous Kit

[jason0156]

Anyone have one installed on their Gt500? I have been doing lots of research,but no luck. Other then the one article with grabber blue with red stripes done by AMP performance. I am looking to do a 35 to 50hp to cool the intake charge.

 

[jeffie on juice]

i have installed 2 on the gt500 and about 30 on other cars
i would suggest just doing a dry 35shot if your not in the mood to have the car tuned.
on my lightning i went with a ZEX dry nozzle set up after the MAF. picked up 62rwhp from it and 80tq
I would suggest running a bottle warmer also because it is a night and difference hit when the bottle is cold compared to being at 1100 psi.
If u were looking to get the most out of it then i would suggest either a 50-75 wet shot
The one i installed we just hooked it up to a button on the shifter using it as the WOT switch, other set up was from ZEX

 

[rodfarva]

I'm running a ZEX wet kit on my 2010 GT500 with a Whipple 2.9. I'm using a window switch and spraying from 3000-6000 rpm.

My car went from 793 rwhp on C16 with 24 psi boost to 846 rwhp with a 75 shot. It picked up crazy torque--went from 818 rwtq to 978 rwtq!!! I've not run the nitrous anywhere other than the dyno yet, as I'm already tempting fate of the factory rods and I don't yet have a built motor on standby.

 

[iRoush]

I'm running a ZEX wet kit on my 2010 GT500 with a Whipple 2.9. I'm using a window switch and spraying from 3000-6000 rpm.

My car went from 793 rwhp on C16 with 24 psi boost to 846 rwhp with a 75 shot. It picked up crazy torque--went from 818 rwtq to 978 rwtq!!! I've not run the nitrous anywhere other than the dyno yet, as I'm already tempting fate of the factory rods and I don't yet have a built motor on standby.

You're my idol! lol!

I thought about running the good ole juice myself. Scared though. Can't afford to fix it if it breaks. lol.

 

[Cal26Stang]

dude, that is so much torque on the stock components, you are the definition of borrowed time...get on that built motor asap lol