- Joined
- May 29, 2007
- Posts
- 1,067
- Reaction score
- 1
Lethal Performance now offers a newer/larger intake system for the 07-12 GT500. The new Carbon Fiber Big Air kits measure a massive 127mm inner diameter with a 5" opening for where it meets the filter. These kits will fit all 07-12 GT500's as well as the 2011 5.0L cars running the Whipple or Roush supercharger kits.
$449.00
07-09 Kits
JLT 07-09 GT500 Carbon Fiber 127mm Cold Air Induction Kit [JLT-CFCAI127-GT500-07] : Lethal Performance, Performance parts for Ford Mustangs
10-12 Kits
JLT 2010-2012 Shelby GT500 127mm Carbon Fiber Big Air Intake Kit [CFCAI127-GT500-10] : Lethal Performance, Performance parts for Ford Mustangs
When JLT developed the 2010-2012 Shelby GT500 intake they did something completely different and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!
JLT started from scratch with an all new tube made from high quality pre preg carbon fiber and cured @ over 240 degrees in an autoclave. It’s a full 127mm ID at the MAF area and with a huge 5” opening on the tube it needed a huge filter. So JLT got with S&B and gave them some measurements. JLT loves the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.
The custom heat shield for the 2010-2012 Shelby GT500 seals to the hood and has a special opening to accept the stock air inlet from the grille
Finish it off with a silicone coupler and stainless clamps and you got the biggest, all carbon fiber intakes on the market.
Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor.
$449.00
07-09 Kits
JLT 07-09 GT500 Carbon Fiber 127mm Cold Air Induction Kit [JLT-CFCAI127-GT500-07] : Lethal Performance, Performance parts for Ford Mustangs
10-12 Kits
JLT 2010-2012 Shelby GT500 127mm Carbon Fiber Big Air Intake Kit [CFCAI127-GT500-10] : Lethal Performance, Performance parts for Ford Mustangs
When JLT developed the 2010-2012 Shelby GT500 intake they did something completely different and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!
JLT started from scratch with an all new tube made from high quality pre preg carbon fiber and cured @ over 240 degrees in an autoclave. It’s a full 127mm ID at the MAF area and with a huge 5” opening on the tube it needed a huge filter. So JLT got with S&B and gave them some measurements. JLT loves the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.
The custom heat shield for the 2010-2012 Shelby GT500 seals to the hood and has a special opening to accept the stock air inlet from the grille
Finish it off with a silicone coupler and stainless clamps and you got the biggest, all carbon fiber intakes on the market.
Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor.
