RIM Fitment with rear Coilovers

[V-tecGT]

Hello everyone i just got a 2006 Mustang GT with a vortech supercharger. I wanted to get some new rims because it had the stock bullits on it there 17x8 i belive. the only thing is that the car has been lowered F+R but the rear has coilovers and it looks like if i put some wide tires on the back they might rub. anyone on here have coilovers with like a 10-10.5 rim. i want to try and get 305-315 on in if poss. THANKS LARRY.
http://www.ground-control-store.com/images/datapage/4007_dp.jpg
these are like what is on the back

 

[rojizostang]

i'll trade you my stock rear shocks and eibach pro kit....then it won't be an issue....j/k

i've been thinking about coilovers, i may have to look at that kit you've got

 

[don_w]

When I had M/T 28x11.50-15 slicks on 15x9.75 Bogarts, I had to run 5/16" spacers for the tires to clear the coilovers. That tire has a 12.9" section width.

 

[V-tecGT]

is that slick wider than a 305 or 315?

 

[07 Boss]

is that slick wider than a 305 or 315?

divide by 25.4 and this should give you inches instead of milimeters.

a 305 is 12.01"

 

[V-tecGT]

damm thats cutting it close. what was the offset that you were using with the slick?

 

[don_w]

damm thats cutting it close. what was the offset that you were using with the slick?

7.25" backspacing.