I got an over all spec from a BlueOval tech of 40-45 in lbs for new bearings. He suggested adding 10in lbs to the over all rotational torque because my backlash felt good. That would give me an overall of 25-30 for the used bearings.
Sent from my iPhone using Tapatalk
I have a 2011 with the factory 3.73 rear gear ratio in it. Over time the rear end has developed a howl at 60+mph and on deceleration after letting off the gas.
I'm pretty sure that the pinion bearing is loose, I know that the spec for a used pinion bearing preload is 8-14 in lbs. Does...
So i bought the JLT kit for a gt500 with the Brembo brakes that did not come with the front bezels. It came with the backing plate, hoses, zip ties, and hose clamps
I ordered these header reducers Amazon.com: Spectre Performance (4641) 3" Header Reducer Gasket with Bolts...
I wanted to do the same thing and I had to come up with something of my own.
I'll take a pic when I get out of work. I used a jlt kit 2.5" for the hose and backing plate. (I know everyone wants bigger but it was right for my budget) and used some modified header collectors for up front in the...
Kelly I'm not sure if Gabe is referring to this part
http://www.bmrsuspension.com/?page=products&productid=964
But i am interested in what the benefits of this would be over using just your adjustable upper control arm with the stock mount.
Thanks
The rig that the guy used when I had mine done used 2 aluminum poles from a chain link fence bolted together so he had almost 16 foot. I'll try and get an in edited picture.
Ok so it might not be just me. I went 2 weeks ago Friday and could only get one run down the track that I could give it full throttle. I was spinning 3 gears and had to take it easy down the track because the rear end was kicking out.
I have stock summer pzero's, and this is the first car I...
Mike,
Those are some good times even stock.
I am a rookie at the drag strip and have an 11 5.0 with brembos and the stock pirellis. I have been 3 times and cannot find traction, at launch or down the track.
What is your burnout process and what do you set the stock tire psi to? What rpm did...