Recent content by louis

Thanks for the suggestions. i finally went for changing the PCM and now the car functions with no codes at all..It is working well so far. He made a second key with chip, i guess it's for clearing the codes..

Thanks for the answer. It's clear. At first i had O2 sensor code malfunction which i changed it but it is still there. After a while the cylinder 5 is malfunction. We changed the 8 spark plugs and the cylinder gave same issue. Until the guy concluded it's the PCM fault. The PCM to swap is used...

My car is in the garage and the guy is waiting for me to decide. I just wanted to know if such procedure with the PCM is possible or not. The plugs i used are standard motorcraft for Mustang GT.

it seems the PCM is not stabilizing the car so it needs to be changed, but my question is can we install a different part number instead of the same.

I have an 06 Mustang GT 5 speed manual with 38Kmiles. I started to have O2 sensor problem bank1 sensor1 and i changed it but the engine light is still on. After a while the engine started to sound weird. I took it to the mechanic, he said you need to change the 8 spark plugs which we did, but...

As a result i need to change the computer of the car and this will cost me 1700 $. It is Ford Garage not in the US. He said once he changes the computer, he will know for sure where is the problem. So again this not Ford in USA. I am getting suspicious.. i will take the car to somewhere else and...

Update to the issues. I took the car to Ford dealer where they should do a diagnostic on it and find out what are the problems. I received a call from them asking me for the second key of the car so they can reprogarm the computer because all the wirings are ok. He said about an issue with a...

Hi, I am having the same code error on my 2006 mustang Gt. The thing is, it comes and it goes.. but recently it is there. So do you have some pictures to where it is located and if it is feasible to change it by oneself ? Thanks

Hi, I am planing to change the shaker 500 to a 7 inch touch screen on my 2006 Mustang GT. What do you suggest as touch screen ? Thanks

I have a normal 2006 mustang GT- I frankly don't see what do you mean by headers. Nothing is modified in my car. I don't have a multi-meter and don't know from where to start if i have.. Could it be from the fuses?

Hi, I have a 2006 Mustang GT. I started to have the engine sign on the board, so i used my OBDII scanner and it gave me error O2 sensor heater circuit Malfunction Bank 1 Sensor 1. I understand that the sensor needs to be changed. So it's on the passenger side upstream according to many...

Thanks for the info. So is it bad enough that the engine sign shows just for the O2 sensors or is there something else. I just went on eBay and looked for those sensors, now i know what they look like. In all cases i will purchase them from eBay since they are not expensive, but the question...

ok here it goes again, i have codes P0135, P0193 and P1000 Do I need to take it to the repair shop? it looks like a rooky question..

If i remember it's P0135. For sure next time i will record it.

I am having the engine sign from time to time that keeps coming back. I am canceling it by using the OBDII, but the question is why keeps on coming back? The car runs great. Oil is ok etc..