Saleen blower VI throttle body upgrade

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
S197 Team Member
Joined
Jul 10, 2007
Posts
40,221
Reaction score
3,138
Location
Long Island NY
your car is a DD, you can't build the motor, your already near the edge of power... and you want to add more.... SMH.....


good luck...


I'll watch for the next thread.... " I have a new window to show off"
 

mustang1200

Badass
Joined
Sep 7, 2009
Posts
334
Reaction score
0
your car is a DD, you can't build the motor, your already near the edge of power... and you want to add more.... SMH.....


good luck...


I'll watch for the next thread.... " I have a new window to show off"

What this guy said.
 

Mustangfan

forum member
Joined
Jul 9, 2013
Posts
189
Reaction score
0
I'm running the saleen blower on my 2010. Running stock airbox, S&H aem fuel pump upgrade and 3.6 pulley. Making 440rwhp, 405tq. It's as far as I'll got on stock block. It's my daily and 20k miles on the setup no issues.
 

Davidx9x

forum member
Joined
Jun 22, 2014
Posts
237
Reaction score
0
Location
Essex County, NJ
I'm running the saleen blower on my 2010. Running stock airbox, S&H aem fuel pump upgrade and 3.6 pulley. Making 440rwhp, 405tq. It's as far as I'll got on stock block. It's my daily and 20k miles on the setup no issues.


Very nice! 440rwhp? Nice numbers! I'm probly over that with my mods


Sent from my iPhone using Tapatalk
 

zoomerman46

forum member
Joined
Nov 15, 2007
Posts
69
Reaction score
4
Location
Vernon,CT
I am running a Saleen Series VI,3.6 pulley,39lb injectors,KB-Bap 20amp with a Ford Racing TB,95mm WMSRacing CAI and Cervini Ram-Air hood getting direct outside air straight into the TB.. Custom SCT tune. 7.5lb boost with a hi-flow catted x-pipe and stock mufflers.

Dyno,d on a Mustang Dyno at 450 rwhp and 430 tg @6200. With stock TB all else being the same dyno'd at 425 rwhp and 410tg. So, in my case the Ford Racing TB did make a difference.
Saleen SC has been on my 05 GT since 2006 with never any problems.
 

Davidx9x

forum member
Joined
Jun 22, 2014
Posts
237
Reaction score
0
Location
Essex County, NJ
I am running a Saleen Series VI,3.6 pulley,39lb injectors,KB-Bap 20amp with a Ford Racing TB,95mm WMSRacing CAI and Cervini Ram-Air hood getting direct outside air straight into the TB.. Custom SCT tune. 7.5lb boost with a hi-flow catted x-pipe and stock mufflers.

Dyno,d on a Mustang Dyno at 450 rwhp and 430 tg @6200. With stock TB all else being the same dyno'd at 425 rwhp and 410tg. So, in my case the Ford Racing TB did make a difference.
Saleen SC has been on my 05 GT since 2006 with never any problems.



Nice numbers!!! I am running a smaller pulley and a similar setup besides the long tubes and detroit rockers blower cams. Haven't dynoed since the lts and rockers were installed


Sent from my iPhone using Tapatalk
 

Jeepngli

Anti-LS1
Joined
Mar 31, 2009
Posts
1,565
Reaction score
7
Location
NJ
If that car was my DD, I'd want to know where I am power wise and A/F. Sounds like your definitely on the edge with those mods.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top