What have you done to your mustang today?

Well fell short of my quest for 170 mph in the 1/2 mile today- ran a few 169's and a 168- best was 169.24, Had a good time running the event and met some nice people-Will definitely run another event.

install a prothane rear sway bar bushing kit today to replace the worn out stockers.

had the air bag recall done

I told the writer I needed to talk to whomever moved the car, two mins later one of the writers comes out and tells me to put the car in the street, it was in the entrance to the shop, and they will do it in the street so one has to drive it. I think the tech was in the car a total of 5 mins, separated by 15 mins waiting for the parts department to open

I called my local dealership (10-15 minute drive) and was told they needed it all day, I said for a 15 minute job? The service writer said it would take at least a couple hours. BAH!

Cam is getting me setup at his dealership (30-35 minute drive) for a much shorter visit. Not sure why dealerships can't be more accommodating like Cam.

slackinoff said:

In the tune, you could have the high speed radiator fan come on earlier to help at slow speed, air drawing across condenser.

Sent from my LG-H910 using Tapatalk

Click to expand...

On my 2010, the high speed radiator fan is on full bore mode, anytime the AC is on. That is with the oem Ford tune..and also the oem Roush M90 blower tune..and also the now used VMP tune. Instant cold air, but I do use it in re-circulate mode, with all 3 yellow leds on.

I abused my car a little today

Sent from my SM-G900V using Tapatalk

bunits19714 said:

Well fell short of my quest for 170 mph in the 1/2 mile today- ran a few 169's and a 168- best was 169.24, Had a good time running the event and met some nice people-Will definitely run another event.

Click to expand...

Dayum!

Sent from my LG-H910 using Tapatalk

Mr. Q said:

I abused my car a little today

Sent from my SM-G900V using Tapatalk

Click to expand...

Lol, done the same except for about 800lbs of tools......I had to brace the trunk panel with bed slats.

Sent from my LG-H910 using Tapatalk

I'd hate to see your idea of "a lot of abuse". Damn!

Mr. Q said:

I abused my car a little today

Sent from my SM-G900V using Tapatalk

Click to expand...

I'd say more than just a little lol. I'd be really concerned about getting seat tears from all those logs.. What you really need is a truck

FFS Q - use a fucking blanket or towel for the damn least to protect the leather...

Ahahaha, everything worked out ok
It was a spur of the moment thing and didn't have anything available lol


See? Good as new!



Sent from my SM-G900V using Tapatalk

slackinoff said:

Dayum!

Sent from my LG-H910 using Tapatalk

Click to expand...

This was with a da of about 2800, a nice -400 to 1000 DA I would of definitely hit my 170 and then some.

Mr. Q said:

Ahahaha, everything worked out ok
It was a spur of the moment thing and didn't have anything available lol


See? Good as new!

Sent from my SM-G900V using Tapatalk

Click to expand...

What do the back of the front seats look like along with the rear seats lol.

06 T-RED S/C GT said:

What do the back of the front seats look like along with the rear seats lol.

Click to expand...

Totally fine! I was careful hahaha

Sent from my SM-G900V using Tapatalk

Mr. Q said:

Totally fine! I was careful hahaha

Sent from my SM-G900V using Tapatalk

Click to expand...

Good to know

Pretty eventful day

She is coming along nicely, new springs, shocks, sway bar end links, brakes, rotors....and finally got my hangers in for the exhaust. Let me know what you guys think....

Looking good

Springs are upside down. ;-)

bujeezus said:

Springs are upside down. ;-)

Click to expand...

I did that on my first spring swap. Live and learn, and relearn.