S550 seats in S197

What’s it missing I may have it

Also missing one ring for the driver side subwoofer.



Also, this portion is broken.. I guess I could use a washer, but that is ghetto.

I’ve got a subwoofer ring if needed

You have a pm.

Sorry for all of the questions JKoogler, but I have a line on some GT350 seats and am curious if they can fully work in my 13’ Boss.

Can you elaborate more on how you were able to get the heating and cooling to work? I have seen heated seats swapped but have not seen cooled. What are you using to control them? Also, are the side airbags functioning? Any nanny lights on your dash?

Thanks and amazing work

I hard wired them bypassing the module and put them on rocker style switches. Make sense? Basically you have to bypass the big module under the seat. My airbags in seats don't work since I didn't have the original seat bladders.

I hard wired them bypassing the module and put them on rocker style switches. Make sense? Basically you have to bypass the big module under the seat. My airbags in seats don't work since I didn't have the original seat bladders.

Oh, so you located the two wires or however many controlled the heated portion or cooled portion and put them on a power circuit with a toggle switch?

yes exactly

Thank you. If you have any additional photos of the seat bottoms after you merged wiring that would be very helpful. Thank you for the earlier feedback.

Great thread. My car only sees summer, so I want to do a seat upgrade and switch the heated seat buttons to run AC seats.

I know this is a semi old thread, but hope it’s still somewhat active.

Jkoogler, your rear seat install is really clean. How did you manage to get the middle of the two back seats to fit so well together. I just did this swap in my 07, and I’ve got a pretty large gap between the two back seat upright portions.