285/35r19 19x10.5 question

can I go 1.75 in the rear with a 285/35 and a 10.5 wide wheel? I’m about to order a new setup and want to make sure.

Dailon hall said:

can I go 1.75 in the rear with a 285/35 and a 10.5 wide wheel? I’m about to order a new setup and want to make sure.

Click to expand...

this question is not clear.


" can I go 1.75 in the rear" ?? like a dildo? seriously dude, edit the post to be clear

That's a really small dildo!

skwerl said:

That's a really small dildo!

Click to expand...

depends on if he's talking length or girth....

LOL!!!

stkjock said:

this question is not clear.


" can I go 1.75 in the rear" ?? like a dildo? seriously dude, edit the post to be clear

Click to expand...

1.75 in lower in the rear lol

Still not much information to go on. What offset wheels are you getting?

This all depends on the offset of the wheel. There are a lot of 10.5" wide wheels on the market that stick out a lot on the rear of these cars. It will need to be in the neighborhood of ET45-ET50 to not stick out and interfere with the fender.

Cory

Bare min of 51 mm required. You will have sidewalls sticking way out if a 45mm offset used.

A 54mm ET would be perfect. A 1.75" rear drop is a bunch. You require the rear tire to be tucked inboard of the fender. Screw up the ET..and you will kick yourself. At least on my 2010 GT. I believe the 05-09 cars are similar. The 10-12 cars all share the same body style.

Pentalab said:

Bare min of 51 mm required. You will have sidewalls sticking way out if a 45mm offset used.

A 54mm ET would be perfect. A 1.75" rear drop is a bunch. You require the rear tire to be tucked inboard of the fender. Screw up the ET..and you will kick yourself. At least on my 2010 GT. I believe the 05-09 cars are similar. The 10-12 cars all share the same body style.

Click to expand...

19x10.5" ET45 sits half a mm further out than 19x11" ET52 which is a proven direct fit in the rear that does not poke at all. A 19x10.5" ET51 would certainly work well, but it's not at all a bare minimum requirement.

Here is 19x11" ET52 on the back of this Boss 302 with a 305/30-19 Pilot Sport 4S


Here is the same wheel as above but this time with a 305/30-19 Cup2 tire on a GT350


Finally, here is a GT500 with 18x11" ET52 wrapped in a 315/30-18 BFG Rival. Not the best angle, but you get the idea


- Cory